lkml.org 
[lkml]   [2003]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [More Info] Re: 2.6.0test 1 fails on eth0 up (arjanv RPM's - all needed rpms installed)
On Tue, Jul 15, 2003 at 04:10:38PM -0400, Trever L. Adams wrote:
> kernel: ehci_hcd 0000:00:02.2: PCI device 10de:0068 (nVidia Corporation)
> kernel: irq 3: nobody cared!
> kernel: Call Trace:
> kernel: [<c010c12a>] __report_bad_irq+0x2a/0x90
> kernel: [<c010c21c>] note_interrupt+0x6c/0xb0
> kernel: [<c010c42d>] do_IRQ+0xed/0x110
> kernel: [<c010a9f8>] common_interrupt+0x18/0x20
> kernel: [<c011f700>] do_softirq+0x40/0xa0
> kernel: [<c010c414>] do_IRQ+0xd4/0x110
> kernel: [<c010a9f8>] common_interrupt+0x18/0x20
> kernel: [<c010c84e>] setup_irq+0x6e/0xb0
> kernel: [<e087e310>] usb_hcd_irq+0x0/0x60 [usbcore]

Hm, but usb_hcd_irq() reports back the proper interrupt return value. I
don't see how this could happen, unless the ehci driver was somehow
halted...

David, any ideas?

thanks,

greg k-h
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:46    [W:0.087 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site