lkml.org 
[lkml]   [2003]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patches in this message
/
Date
From
SubjectThree drivers/i2c/ patches
Hi Greg,

these are 2 patches to the drivers/i2c subdirectory.

The first patch removes a warning from i2c-algo-bit.c, which I get
regularly with my tv cards. It's more an info than a failure and
spamming the logs at a rate of about 1/min. It indicates a send failure
on the i2c bus or a miss of the ACK. Technically I think, it should
resend the message, shouldn't it?

The second patch removes the cli/sti usage from i2c-elektor. It's only
used to protect pcf_pending from changing. I replaced it (hopefully
correct) with a spinlock.

The third patch is actually a resend and converts w83781d to use milli
Celsius instead of centi Celsius.

Thanks,

Jan



--
Linux rubicon 2.5.75-mm1-jd10 #1 SMP Sat Jul 12 19:40:28 CEST 2003 i686
--- linux-bk/drivers/i2c/i2c-algo-bit.c Mon May 5 01:53:31 2003
+++ 2.5.75-bk1-jd2/drivers/i2c/i2c-algo-bit.c Sat Jul 12 23:22:01 2003
@@ -347,7 +347,6 @@
temp++;
wrcount++;
} else { /* arbitration or no acknowledge */
- dev_err(&i2c_adap->dev, "sendbytes: error - bailout.\n");
i2c_stop(adap);
return (retval<0)? retval : -EFAULT;
/* got a better one ?? */This removes cli/sti from i2c-elektor which protected pcf_pending from changing.
Replaced by a spinlock instead.

Jan

diff -urN -X exclude linux-bk/drivers/i2c/i2c-elektor.c 2.5.75-bk1/drivers/i2c/i2c-elektor.c
--- linux-bk/drivers/i2c/i2c-elektor.c Sun Jun 15 14:04:13 2003
+++ 2.5.75-bk1/drivers/i2c/i2c-elektor.c Sat Jul 12 11:51:34 2003
@@ -59,6 +59,8 @@
need to be rewriten - but for now just remove this for simpler reading */

static wait_queue_head_t pcf_wait;
+
+spinlock_t pcf_pending_lock = SPIN_LOCK_UNLOCKED;
static int pcf_pending;

/* ----- global defines ----------------------------------------------- */
@@ -120,12 +122,12 @@
int timeout = 2;

if (irq > 0) {
- cli();
+ spin_lock_irq(&pcf_pending_lock);
if (pcf_pending == 0) {
interruptible_sleep_on_timeout(&pcf_wait, timeout*HZ );
} else
pcf_pending = 0;
- sti();
+ spin_unlock_irq(&pcf_pending_lock);
} else {
udelay(100);
}
@@ -133,8 +135,11 @@


static irqreturn_t pcf_isa_handler(int this_irq, void *dev_id, struct pt_regs *regs) {
+ unsigned long flags;
+ spin_lock_irqsave(&pcf_pending_lock, flags);
pcf_pending = 1;
wake_up_interruptible(&pcf_wait);
+ spin_unlock_irqrestore(&pcf_pending_lock, flags);
return IRQ_HANDLED;
}
--- linux-mm/drivers/i2c/chips/w83781d.c 2003-07-03 15:17:37.000000000 +0200
+++ 2.5.73-mm3/drivers/i2c/chips/w83781d.c 2003-07-10 13:43:49.000000000 +0200
@@ -496,13 +496,13 @@
if (nr >= 2) { /* TEMP2 and TEMP3 */ \
if (data->type == as99127f) { \
return sprintf(buf,"%ld\n", \
- (long)AS99127_TEMP_ADD_FROM_REG(data->reg##_add[nr-2])); \
+ (long)AS99127_TEMP_ADD_FROM_REG(data->reg##_add[nr-2])*10); \
} else { \
return sprintf(buf,"%ld\n", \
- (long)TEMP_ADD_FROM_REG(data->reg##_add[nr-2])); \
+ (long)TEMP_ADD_FROM_REG(data->reg##_add[nr-2])*10); \
} \
} else { /* TEMP1 */ \
- return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
+ return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)*10); \
} \
}
show_temp_reg(temp);
@@ -516,7 +516,7 @@
struct w83781d_data *data = i2c_get_clientdata(client); \
u32 val; \
\
- val = simple_strtoul(buf, NULL, 10); \
+ val = simple_strtoul(buf, NULL, 10)/10; \
\
if (nr >= 2) { /* TEMP2 and TEMP3 */ \
if (data->type == as99127f) \
\
 
 \ /
  Last update: 2005-03-22 13:46    [W:0.099 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site