lkml.org 
[lkml]   [2003]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: USB stops working with any of 2.4.22-pre's after 2.4.21
Sorry if this is a duplicate...I received an error bounce

----
ACPI isn't absolutely needed, but it comes in handy for issuing a
shutdown.
Though I suppose I can use apm to do this as well.

On a uni-processor system, isn't the ACPI tables used to setup the
IO-APIC bits to have PCI IRQ routing so that I have more than 16
interrupts? This was another reason I had enabled ACPI.

When I do get those interrupt problems, my network still continues to
function while the USB mouse fails. I do agree it's not USB specific.
It's more tied in to ACPI/(IO-)APIC.

When I get back home, I'll try booting it with acpi=off on pre4 and see
how it goes.

John

On Thu, Jul 10, 2003 at 10:02:17AM -0700, Greg KH wrote:
> On Wed, Jul 09, 2003 at 11:58:01PM -0700, John Wong wrote:
> > Jul 9 23:39:44 gambit kernel: eth0: Resetting the Tx ring pointer.
> > Jul 9 23:39:51 gambit kernel: usb-ohci.c: unlink URB timeout
> > Jul 9 23:39:54 gambit kernel: NETDEV WATCHDOG: eth0: transmit timed out
>
> Hm, looks like bad things are happening with your interrupts.
>
> Do you need acpi to run this box? What happens if you disable it?
>
> As it looks like networking is also in trouble, I don't think this is a
> USB specific problem for you.
>
> Good luck,
>
> greg k-h
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:46    [W:0.076 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site