lkml.org 
[lkml]   [2003]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectICH5 SATA causes high interrupt/system load?
From
Date
Hi,

After reading about problems with ICH5 SATA (Intel 875P) I've
set my BIOS back to normal mode for the SATA controller. So now the SATA
drive appears as hdc instead of hde.

The SATA drive was working in both situations (enhanced/normal) the only
difference is that with normal mode there no high system load caused by
the SATA controller (As I reported in a previous mail).

What's causing the high interrupt count in 'enhanced' mode?

Nb I have seen this on both 2.4.21 and 2.5.73.

Cheers,

Jurgen

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:46    [W:0.046 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site