lkml.org 
[lkml]   [2003]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH][RFC] Add support for Adaptec 1210SA (was: Re: SiI3112 (Adaptec 1210SA): no devices)
On Sat, Jun 07, 2003 at 02:02:34PM -0400, Alan Cox wrote:
> > I've assumed that it's exactly like a SiI3112 in making these
> > changes. The kernel now recognises the device, and I can (e.g.) run
> > cfdisk. However, any read or write on the disk causes huge delays, and
> > these:
>
> Its clearly clos in that it works in PIO although DMA is failing

Given that there appear to be problems with DMA in the plain SiI
driver, would it be worth my while waiting until those are sorted out
before continuing?

> > I don't have the knowledge to determine whether this is similar to
> > the SiI3112 problems people have been having elsewhere, or if it's a
>
> It is

That's good to know.

> > Model=ST3120026AS, FwRev=3.05, SerialNo=3JT059GT
>
> According to the info I have that drive should be working ok

I recall Andre Hedrick commenting apparently disparagingly on the
80Gb version of the Seagate drives[1], although I don't get the errors
seen in that post.

> This is a very good starting point anyway

What would be the next steps in getting this thing working? Should
I try to obtain the board/chip specifications from Adaptec? Or start
poking stuff into arbitrary registers? :)

Hugo.

[1] http://marc.theaimsgroup.com/?l=linux-kernel&m=105013509721375&w=2

--
=== Hugo Mills: hugo@... carfax.org.uk | darksatanic.net | lug.org.uk ===
PGP key: 1C335860 from wwwkeys.eu.pgp.net or http://www.carfax.org.uk
--- The future isn't what it used to be. ---
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2005-03-22 13:36    [W:0.123 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site