Messages in this thread Patch in this message | | | Date | Sat, 7 Jun 2003 10:04:36 +0200 | From | Sam Ravnborg <> | Subject | Re: Docbook update |
| |
# This is a BitKeeper generated patch for the following project: # Project Name: Linux kernel tree # This patch format is intended for GNU patch command version 2.5 or higher. # This patch includes the following deltas: # ChangeSet 1.1316.1.1 -> 1.1316.1.2 # drivers/net/sis900.c 1.36 -> 1.37 # # The following is the BitKeeper ChangeSet Log # -------------------------------------------- # 03/06/07 sam@mars.ravnborg.org 1.1316.1.2 # docbook: Recognize sis900 functions # # Adapted comments to follow what kernel-doc (docbook) understands # -------------------------------------------- # diff -Nru a/drivers/net/sis900.c b/drivers/net/sis900.c --- a/drivers/net/sis900.c Sat Jun 7 09:53:46 2003 +++ b/drivers/net/sis900.c Sat Jun 7 09:53:46 2003 @@ -211,7 +211,7 @@ static void sis900_set_mode (long ioaddr, int speed, int duplex); /** - * sis900_get_mac_addr: - Get MAC address for stand alone SiS900 model + * sis900_get_mac_addr - Get MAC address for stand alone SiS900 model * @pci_dev: the sis900 pci device * @net_dev: the net device to get address for * @@ -241,7 +241,7 @@ } /** - * sis630e_get_mac_addr: - Get MAC address for SiS630E model + * sis630e_get_mac_addr - Get MAC address for SiS630E model * @pci_dev: the sis900 pci device * @net_dev: the net device to get address for * @@ -274,7 +274,7 @@ /** - * sis635_get_mac_addr: - Get MAC address for SIS635 model + * sis635_get_mac_addr - Get MAC address for SIS635 model * @pci_dev: the sis900 pci device * @net_dev: the net device to get address for * @@ -310,7 +310,7 @@ } /** - * sis96x_get_mac_addr: - Get MAC address for SiS962 or SiS963 model + * sis96x_get_mac_addr - Get MAC address for SiS962 or SiS963 model * @pci_dev: the sis900 pci device * @net_dev: the net device to get address for * @@ -352,7 +352,7 @@ } /** - * sis900_probe: - Probe for sis900 device + * sis900_probe - Probe for sis900 device * @pci_dev: the sis900 pci device * @pci_id: the pci device ID * @@ -498,7 +498,7 @@ } /** - * sis900_mii_probe: - Probe MII PHY for sis900 + * sis900_mii_probe - Probe MII PHY for sis900 * @net_dev: the net device to probe for * * Search for total of 32 possible mii phy addresses. @@ -618,7 +618,7 @@ } /** - * sis900_default_phy: - Select default PHY for sis900 mac. + * sis900_default_phy - Select default PHY for sis900 mac. * @net_dev: the net device to probe for * * Select first detected PHY with link as default. @@ -671,7 +671,7 @@ /** - * sis900_set_capability: - set the media capability of network adapter. + * sis900_set_capability - set the media capability of network adapter. * @net_dev : the net device to probe for * @phy : default PHY * @@ -701,7 +701,7 @@ #define eeprom_delay() inl(ee_addr) /** - * read_eeprom: - Read Serial EEPROM + * read_eeprom - Read Serial EEPROM * @ioaddr: base i/o address * @location: the EEPROM location to read * @@ -776,7 +776,7 @@ } /** - * mdio_read: - read MII PHY register + * mdio_read - read MII PHY register * @net_dev: the net device to read * @phy_id: the phy address to read * @location: the phy regiester id to read @@ -818,7 +818,7 @@ } /** - * mdio_write: - write MII PHY register + * mdio_write - write MII PHY register * @net_dev: the net device to write * @phy_id: the phy address to write * @location: the phy regiester id to write @@ -872,7 +872,7 @@ /** - * sis900_reset_phy: - reset sis900 mii phy. + * sis900_reset_phy - reset sis900 mii phy. * @net_dev: the net device to write * @phy_addr: default phy address * @@ -895,7 +895,7 @@ } /** - * sis900_open: - open sis900 device + * sis900_open - open sis900 device * @net_dev: the net device to open * * Do some initialization and start net interface. @@ -952,7 +952,7 @@ } /** - * sis900_init_rxfilter: - Initialize the Rx filter + * sis900_init_rxfilter - Initialize the Rx filter * @net_dev: the net device to initialize for * * Set receive filter address to our MAC address @@ -990,7 +990,7 @@ } /** - * sis900_init_tx_ring: - Initialize the Tx descriptor ring + * sis900_init_tx_ring - Initialize the Tx descriptor ring * @net_dev: the net device to initialize for * * Initialize the Tx descriptor ring, @@ -1023,7 +1023,7 @@ } /** - * sis900_init_rx_ring: - Initialize the Rx descriptor ring + * sis900_init_rx_ring - Initialize the Rx descriptor ring * @net_dev: the net device to initialize for * * Initialize the Rx descriptor ring, @@ -1077,7 +1077,7 @@ } /** - * sis630_set_eq: - set phy equalizer value for 630 LAN + * sis630_set_eq - set phy equalizer value for 630 LAN * @net_dev: the net device to set equalizer value * @revision: 630 LAN revision number * @@ -1165,7 +1165,7 @@ } /** - * sis900_timer: - sis900 timer routine + * sis900_timer - sis900 timer routine * @data: pointer to sis900 net device * * On each timer ticks we check two things, @@ -1235,7 +1235,7 @@ } /** - * sis900_check_mode: - check the media mode for sis900 + * sis900_check_mode - check the media mode for sis900 * @net_dev: the net device to be checked * @mii_phy: the mii phy * @@ -1266,7 +1266,7 @@ } /** - * sis900_set_mode: - Set the media mode of mac register. + * sis900_set_mode - Set the media mode of mac register. * @ioaddr: the address of the device * @speed : the transmit speed to be determined * @duplex: the duplex mode to be determined @@ -1310,7 +1310,7 @@ } /** - * sis900_auto_negotiate: Set the Auto-Negotiation Enable/Reset bit. + * sis900_auto_negotiate - Set the Auto-Negotiation Enable/Reset bit. * @net_dev: the net device to read mode for * @phy_addr: mii phy address * @@ -1344,7 +1344,7 @@ /** - * sis900_read_mode: - read media mode for sis900 internal phy + * sis900_read_mode - read media mode for sis900 internal phy * @net_dev: the net device to read mode for * @speed : the transmit speed to be determined * @duplex : the duplex mode to be determined @@ -1401,7 +1401,7 @@ } /** - * sis900_tx_timeout: - sis900 transmit timeout routine + * sis900_tx_timeout - sis900 transmit timeout routine * @net_dev: the net device to transmit * * print transmit timeout status @@ -1456,7 +1456,7 @@ } /** - * sis900_start_xmit: - sis900 start transmit routine + * sis900_start_xmit - sis900 start transmit routine * @skb: socket buffer pointer to put the data being transmitted * @net_dev: the net device to transmit with * @@ -1526,7 +1526,7 @@ } /** - * sis900_interrupt: - sis900 interrupt handler + * sis900_interrupt - sis900 interrupt handler * @irq: the irq number * @dev_instance: the client data object * @regs: snapshot of processor context @@ -1587,7 +1587,7 @@ } /** - * sis900_rx: - sis900 receive routine + * sis900_rx - sis900 receive routine * @net_dev: the net device which receives data * * Process receive interrupt events, @@ -1726,7 +1726,7 @@ } /** - * sis900_finish_xmit: - finish up transmission of packets + * sis900_finish_xmit - finish up transmission of packets * @net_dev: the net device to be transmitted on * * Check for error condition and free socket buffer etc @@ -1796,7 +1796,7 @@ } /** - * sis900_close: - close sis900 device + * sis900_close - close sis900 device * @net_dev: the net device to be closed * * Disable interrupts, stop the Tx and Rx Status Machine @@ -1852,7 +1852,7 @@ } /** - * netdev_ethtool_ioctl: - For the basic support of ethtool + * netdev_ethtool_ioctl - For the basic support of ethtool * @net_dev: the net device to command for * @useraddr: start address of interface request * @@ -1886,7 +1886,7 @@ } /** - * mii_ioctl: - process MII i/o control command + * mii_ioctl - process MII i/o control command * @net_dev: the net device to command for * @rq: parameter for command * @cmd: the i/o command @@ -1922,7 +1922,7 @@ } /** - * sis900_get_stats: - Get sis900 read/write statistics + * sis900_get_stats - Get sis900 read/write statistics * @net_dev: the net device to get statistics for * * get tx/rx statistics for sis900 @@ -1937,7 +1937,7 @@ } /** - * sis900_set_config: - Set media type by net_device.set_config + * sis900_set_config - Set media type by net_device.set_config * @dev: the net device for media type change * @map: ifmap passed by ifconfig * @@ -2034,7 +2034,7 @@ } /** - * sis900_mcast_bitnr: - compute hashtable index + * sis900_mcast_bitnr - compute hashtable index * @addr: multicast address * @revision: revision id of chip * @@ -2057,7 +2057,7 @@ } /** - * set_rx_mode: - Set SiS900 receive mode + * set_rx_mode - Set SiS900 receive mode * @net_dev: the net device to be set * * Set SiS900 receive mode for promiscuous, multicast, or broadcast mode. @@ -2131,7 +2131,7 @@ } /** - * sis900_reset: - Reset sis900 MAC + * sis900_reset - Reset sis900 MAC * @net_dev: the net device to reset * * reset sis900 MAC and wait until finished @@ -2166,7 +2166,7 @@ } /** - * sis900_remove: - Remove sis900 device + * sis900_remove - Remove sis900 device * @pci_dev: the pci device to be removed * * remove and release SiS900 net device - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |