Messages in this thread | | | Subject | Re: [RFC PATCH] Re: [OOPS] w83781d during rmmod (2.5.69-bk17) | From | Martin Schlemmer <> | Date | 04 Jun 2003 07:57:31 +0200 |
| |
On Tue, 2003-06-03 at 21:43, Philip Pokorny wrote: > Martin Schlemmer wrote: > > On Mon, 2003-06-02 at 19:20, Greg KH wrote: > > > > Hiya Greg > > > > While sorda on the topic ... since I did the w83781d driver some time > > ago, I changed boards for a P4C800 (Intel 875 chipset), that have a > > ICH5 southbridge, and not a ICH4 one .... I tried to add the ID's > > to the i810 driver, and although it does load (even without the > > ID's added), the I2C bus/sensor does not show in /sys. The w83781d > > driver also load fine btw. > > My system (SuperMicro) with an '875 and ICH5 reports the ICH5 as an > '801EB' which means you should be using the i2c-i801 driver not i2c-i810... >
Right ... at work, so could not verify.
> I'm also betting that you need to set 'isich4' to true in the case of > the ich5 as well... > > Try the attached patch... NOTE: I have *not* consulted the Intel DOC's > on the ICH4 and ICH5 to see if the register interface has changed in > other interesting ways... >
Will let you know, thanks.
Regards,
-- Martin Schlemmer
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |