lkml.org 
[lkml]   [2003]   [Jun]   [3]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
FromSteve Brueggeman <>
SubjectRe: VIA CHIPSET KT 400 / 8235 troubleshooting
DateTue, 03 Jun 2003 11:37:13 -0500
I have a Soyo KT400 Dragon Ultra which would hang at boot unless I
specified "noapic".

linux-2.4.21-rc6-ac1 boots fine with APIC enabled, without the
"noapic" kernel parameter.

So, to install Mandrake 9.1, specify the "noapic" parameter, and once
installed, give linux-2.4.21-rc6-ac1 a try.


Alan, thanks for the fix.  I was beginning to wonder if my KT400
chipset would be supported by a stable kernel.

Steve Brueggeman

On 03 Jun 2003 10:31:37 +0200, you wrote:

>Am Die, 2003-06-03 um 10.17 schrieb Henrik Storner:
>
>> My KT400 motherboard (Soltek) requires me to boot with the "noapic"
>> parameter, or it will hang in a similar manner. Did you try that,
>> or did you just enable/disable the APIC in the BIOS ?
>
>My ECS L7VTA will boot with APIC enabled but has interrupt problems 
>with at least the NIC and thus will stop booting (over network that is).
>Alan told me yesterday in private that he thinks he knows the problem
>and has a solution in his -ac series.
>
>Haven't had a chance to try that though...

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:36    [from the cache]
©2003-2008