lkml.org 
[lkml]   [2003]   [May]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subject2.5.69, IDE TCQ can't be enabled
    Hi.  Please respond directly, as I am not subscribed to the list.

    I started testing 2.5.69, and I can't seem to get TCQ enabled on my
    drives. The test-tcq.pl script indicates that both drives in this
    computer support TCQ:
    # ./test-tcq.pl
    /proc/ide/ide0/hda (WDC WD1200JB-00CRA1) supports TCQ
    /proc/ide/ide3/hdg (Maxtor 6E030L0) supports TCQ

    There are no "TCQ enabled" messages that are displayed.
    /proc/ide/hda/settings says "using_tcq 0 0 32", and changing that does
    nothing, ie "echo using_tcq:32 > /proc/ide/hda/settings" then cat settings
    shows still 0 for value.

    hdparm -Q /dev/hda shows "queue_depth = 0 (off)", then hdparm -Q 8
    /dev/hda gives:
    setting DMA queue_depth to 8 (on)
    HDIO_SET_QDMA failed: Input/output error
    queue_depth = 0 (off)



    According to this message:
    http://marc.theaimsgroup.com/?l=linux-kernel&m=103718775526780&w=2
    there are no requirements for the controller, etc. I have tried both
    controllers in the computer: the motherboard SiS controller
    (SIS5513/Sis735) and the PCI card PDC20262, with no difference.

    I have TCQ enabled in the kernel, with "TCQ on by default". Below are the
    .config and dmesg output. What else should I try?



    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_UID16=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_EXPERIMENTAL=y
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_SYSCTL=y
    CONFIG_LOG_BUF_SHIFT=14
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    CONFIG_OBSOLETE_MODPARM=y
    CONFIG_KMOD=y
    CONFIG_X86_PC=y
    CONFIG_MK7=y
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=6
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_X86_USE_3DNOW=y
    CONFIG_PREEMPT=y
    CONFIG_X86_TSC=y
    CONFIG_X86_MCE=y
    CONFIG_NOHIGHMEM=y
    CONFIG_MTRR=y
    CONFIG_HAVE_DEC_LOCK=y
    CONFIG_PM=y
    CONFIG_ACPI=y
    CONFIG_ACPI_BOOT=y
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_THERMAL=y
    CONFIG_ACPI_BUS=y
    CONFIG_ACPI_INTERPRETER=y
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_PCI=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_PCI=y
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_NAMES=y
    CONFIG_ISA=y
    CONFIG_HOTPLUG=y
    CONFIG_PCMCIA_PROBE=y
    CONFIG_KCORE_ELF=y
    CONFIG_BINFMT_AOUT=y
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_MISC=y
    CONFIG_PARPORT=y
    CONFIG_PARPORT_PC=y
    CONFIG_PARPORT_PC_CML1=y
    CONFIG_PARPORT_1284=y
    CONFIG_PNP=y
    CONFIG_PNP_NAMES=y
    CONFIG_BLK_DEV_FD=y
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_IDEDISK_MULTI_MODE=y
    CONFIG_BLK_DEV_IDECD=y
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_BLK_DEV_GENERIC=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    CONFIG_BLK_DEV_IDE_TCQ=y
    CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=y
    CONFIG_BLK_DEV_IDE_TCQ_DEPTH=8
    CONFIG_IDEDMA_PCI_AUTO=y
    CONFIG_BLK_DEV_IDEDMA=y
    CONFIG_BLK_DEV_ADMA=y
    CONFIG_BLK_DEV_PDC202XX_OLD=y
    CONFIG_BLK_DEV_PDC202XX_NEW=y
    CONFIG_BLK_DEV_SIS5513=y
    CONFIG_IDEDMA_AUTO=y
    CONFIG_BLK_DEV_PDC202XX=y
    CONFIG_BLK_DEV_IDE_MODES=y
    CONFIG_SCSI=y
    CONFIG_BLK_DEV_SD=y
    CONFIG_BLK_DEV_SR=y
    CONFIG_BLK_DEV_SR_VENDOR=y
    CONFIG_CHR_DEV_SG=y
    CONFIG_SCSI_MULTI_LUN=y
    CONFIG_SCSI_REPORT_LUNS=y
    CONFIG_SCSI_AHA1542=m
    CONFIG_SCSI_AIC7XXX=m
    CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
    CONFIG_AIC7XXX_RESET_DELAY_MS=15000
    CONFIG_AIC7XXX_DEBUG_ENABLE=y
    CONFIG_AIC7XXX_DEBUG_MASK=0
    CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
    CONFIG_NET=y
    CONFIG_PACKET=y
    CONFIG_UNIX=y
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    CONFIG_IPV6_SCTP__=y
    CONFIG_NETDEVICES=y
    CONFIG_DUMMY=m
    CONFIG_NET_ETHERNET=y
    CONFIG_NET_PCI=y
    CONFIG_SIS900=y
    CONFIG_INPUT=y
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    CONFIG_SOUND_GAMEPORT=y
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_CORE=y
    CONFIG_UNIX98_PTYS=y
    CONFIG_UNIX98_PTY_COUNT=256
    CONFIG_PRINTER=y
    CONFIG_AGP=y
    CONFIG_AGP_SIS=y
    CONFIG_AGP_SWORKS=y
    CONFIG_VIDEO_DEV=y
    CONFIG_EXT2_FS=y
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_FS_MBCACHE=y
    CONFIG_REISERFS_FS=y
    CONFIG_AUTOFS4_FS=y
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_ZISOFS_FS=y
    CONFIG_UDF_FS=y
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_VFAT_FS=y
    CONFIG_PROC_FS=y
    CONFIG_DEVFS_FS=y
    CONFIG_DEVFS_MOUNT=y
    CONFIG_DEVPTS_FS=y
    CONFIG_TMPFS=y
    CONFIG_RAMFS=y
    CONFIG_NFS_FS=y
    CONFIG_NFSD=y
    CONFIG_LOCKD=y
    CONFIG_EXPORTFS=y
    CONFIG_SUNRPC=y
    CONFIG_SMB_FS=y
    CONFIG_MSDOS_PARTITION=y
    CONFIG_SMB_NLS=y
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-1"
    CONFIG_NLS_CODEPAGE_437=y
    CONFIG_NLS_ISO8859_1=y
    CONFIG_FB=y
    CONFIG_FB_VESA=y
    CONFIG_VIDEO_SELECT=y
    CONFIG_VGA_CONSOLE=y
    CONFIG_DUMMY_CONSOLE=y
    CONFIG_SOUND=y
    CONFIG_SND=y
    CONFIG_SND_SEQUENCER=y
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=y
    CONFIG_SND_PCM_OSS=y
    CONFIG_SND_SEQUENCER_OSS=y
    CONFIG_SND_EMU10K1=y
    CONFIG_SND_INTEL8X0=y
    CONFIG_USB=y
    CONFIG_USB_DEVICEFS=y
    CONFIG_USB_BANDWIDTH=y
    CONFIG_USB_EHCI_HCD=y
    CONFIG_USB_OHCI_HCD=y
    CONFIG_USB_UHCI_HCD=y
    CONFIG_USB_STORAGE=y
    CONFIG_USB_STORAGE_FREECOM=y
    CONFIG_USB_STORAGE_ISD200=y
    CONFIG_USB_STORAGE_JUMPSHOT=y
    CONFIG_USB_HID=y
    CONFIG_USB_HIDINPUT=y
    CONFIG_USB_SERIAL=y
    CONFIG_USB_SERIAL_PL2303=y
    CONFIG_ZLIB_INFLATE=y
    CONFIG_X86_BIOS_REBOOT=y





    Linux version 2.5.69 (root@axp) (gcc version 3.2.2) #2 Thu May 8 23:56:39
    CDT 2003
    Video mode to be used for restore is f00
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
    BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
    BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
    511MB LOWMEM available.
    On node 0 totalpages: 131056
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 126960 pages, LIFO batch:16
    HighMem zone: 0 pages, LIFO batch:1
    ACPI: RSDP (v000 AMI ) @ 0x000fa340
    ACPI: RSDT (v001 AMIINT SiS735XX 00000.04096) @ 0x1fff0000
    ACPI: FADT (v001 AMIINT SiS735XX 00000.04096) @ 0x1fff0030
    ACPI: DSDT (v001 SiS 735 00000.00256) @ 0x00000000
    ACPI: BIOS passes blacklist
    Building zonelist for node : 0
    Kernel command line: BOOT_IMAGE=2569-1 ro root=301 1
    Initializing CPU#0
    PID hash table entries: 2048 (order 11: 16384 bytes)
    Detected 1540.469 MHz processor.
    Console: colour VGA+ 80x25
    Calibrating delay loop... 3047.42 BogoMIPS
    Memory: 514536k/524224k available (2641k kernel code, 8940k reserved, 741k
    data, 132k init, 0k highmem)
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    -> /dev
    -> /dev/console
    -> /root
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 256K (64 bytes/line)
    CPU: After generic, caps: 0383f9ff c1c3f9ff 00000000 00000020
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: AMD Athlon(tm) XP 1800+ stepping 02
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    mtrr: v2.0 (20020519)
    PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
    PCI: Using configuration type 1
    BIO: pool of 256 setup, 14Kb (56 bytes/bio)
    biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
    biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
    biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
    biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
    biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
    biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
    ACPI: Subsystem revision 20030418
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: Power Resource [URP1] (off)
    ACPI: Power Resource [URP2] (off)
    ACPI: Power Resource [FDDP] (off)
    ACPI: Power Resource [LPTP] (off)
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15, disabled)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 12 14 15)
    Linux Plug and Play Support v0.96 (c) Adam Belay
    block request queues:
    128 requests per read queue
    128 requests per write queue
    8 requests per batch
    enter congestion at 15
    exit congestion at 17
    SCSI subsystem initialized
    drivers/usb/core/usb.c: registered new driver usbfs
    drivers/usb/core/usb.c: registered new driver hub
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
    ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
    PCI: Using ACPI for IRQ routing
    PCI: if you experience problems, try using option 'pci=noacpi' or even
    'acpi=off'
    Initializing RT netlink socket
    Enabling SEP on CPU 0
    devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    udf: registering filesystem
    ACPI: Power Button (FF) [PWRF]
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: Processor [CPU1] (supports C1)
    pty: 256 Unix98 ptys configured
    request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
    lp: driver loaded but no devices found
    Linux agpgart interface v0.100 (c) Dave Jones
    agpgart: Detected SiS 735 chipset
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: AGP aperture is 64M @ 0xd0000000
    Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
    tts/0 at I/O 0x3f8 (irq = 4) is a 16550A
    tts/1 at I/O 0x2f8 (irq = 3) is a 16550A
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    sis900.c: v1.08.06 9/24/2002
    eth0: Realtek RTL8201 PHY transceiver found at address 9.
    eth0: Using transceiver found at address 9 as default
    eth0: SiS 900 PCI Fast Ethernet at 0xc400, IRQ 5, 00:07:95:xx:xx:xx.
    Linux video capture interface: v1.00
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with
    idebus=xx
    SIS5513: IDE controller at PCI slot 00:02.5
    SIS5513: chipset revision 208
    SIS5513: not 100% native mode: will probe irqs later
    SiS735 ATA 100 controller
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
    hda: WDC WD1200JB-00CRA1, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hdd: Pioneer DVD-ROM ATAPIModel DVD-116 0107, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    PDC20262: IDE controller at PCI slot 00:0b.0
    PDC20262: chipset revision 1
    PDC20262: not 100% native mode: will probe irqs later
    PDC20262: ROM enabled at 0xcffd0000
    PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
    ide2: BM-DMA at 0xc800-0xc807, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xc808-0xc80f, BIOS settings: hdg:pio, hdh:pio
    hdg: Maxtor 6E030L0, ATA DISK drive
    ide3 at 0xd000-0xd007,0xcc02 on irq 5
    hda: host protected area => 1
    hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=232581/16/63,
    UDMA(100)
    /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 >
    hdg: host protected area => 1
    hdg: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63,
    UDMA(66)
    /dev/ide/host2/bus1/target0/lun0: p1 p2 p3
    end_request: I/O error, dev hdd, sector 0
    hdd: ATAPI 40X DVD-ROM drive, 256kB Cache, UDMA(66)
    Uniform CD-ROM driver Revision: 3.12
    end_request: I/O error, dev hdd, sector 0
    request_module: failed /sbin/modprobe -- scsi_hostadapter. error = -16
    ehci-hcd 00:0d.2: NEC Corporation USB 2.0
    ehci-hcd 00:0d.2: irq 11, pci mem e082ef00
    Please use the 'usbfs' filetype instead, the 'usbdevfs' name is
    deprecated.
    ehci-hcd 00:0d.2: new USB bus registered, assigned bus number 1
    ehci-hcd 00:0d.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jan-22
    hub 1-0:0: USB hub found
    hub 1-0:0: 5 ports detected
    ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ohci-hcd: block sizes: ed 64 td 64
    ohci-hcd 00:02.2: Silicon Integrated S 7001
    ohci-hcd 00:02.2: irq 12, pci mem e0830000
    ohci-hcd 00:02.2: new USB bus registered, assigned bus number 2
    hub 2-0:0: USB hub found
    hub 2-0:0: 3 ports detected
    ohci-hcd 00:02.3: Silicon Integrated S 7001 (#2)
    ohci-hcd 00:02.3: irq 10, pci mem e0832000
    ohci-hcd 00:02.3: new USB bus registered, assigned bus number 3
    hub 3-0:0: USB hub found
    hub 3-0:0: 3 ports detected
    ohci-hcd 00:0d.0: NEC Corporation USB
    ohci-hcd 00:0d.0: irq 11, pci mem e0834000
    ohci-hcd 00:0d.0: new USB bus registered, assigned bus number 4
    hub 4-0:0: USB hub found
    hub 4-0:0: 3 ports detected
    hub 3-0:0: debounce: port 1: delay 100ms stable 4 status 0x301
    hub 3-0:0: new USB device on port 1, assigned address 2
    ohci-hcd 00:0d.1: NEC Corporation USB (#2)
    ohci-hcd 00:0d.1: irq 12, pci mem e0836000
    ohci-hcd 00:0d.1: new USB bus registered, assigned bus number 5
    hub 5-0:0: USB hub found
    hub 5-0:0: 2 ports detected
    drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface
    driver v2.0
    Initializing USB Mass Storage driver...
    drivers/usb/core/usb.c: registered new driver usb-storage
    USB Mass Storage support registered.
    input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-00:02.3-1
    drivers/usb/core/usb.c: registered new driver hid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    drivers/usb/core/usb.c: registered new driver usbserial
    drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
    drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
    drivers/usb/core/usb.c: registered new driver pl2303
    drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
    v0.9
    mice: PS/2 mouse device common for all mice
    input: AT Set 2 keyboard on isa0060/serio0
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Advanced Linux Sound Architecture Driver Version 0.9.2 (Thu Mar 20
    13:31:57 2003 UTC).
    request_module: failed /sbin/modprobe -- snd-card-0. error = -16
    ALSA device list:
    #0: Sound Blaster Live! (rev.7) at 0xc000, irq 12
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP: routing cache hash table of 4096 buckets, 32Kbytes
    TCP: Hash tables configured (established 32768 bind 65536)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    UDF-fs DEBUG fs/udf/lowlevel.c:65:udf_get_last_session: CDROMMULTISESSION
    not supported: rc=-25
    UDF-fs DEBUG fs/udf/super.c:1472:udf_fill_super: Multi-session=0
    UDF-fs DEBUG fs/udf/super.c:460:udf_vrs: Starting at sector 16 (2048 byte
    sectors)
    UDF-fs DEBUG fs/udf/super.c:1208:udf_check_valid: Failed to read byte
    32768. Assuming open disc. Skipping validity check
    UDF-fs DEBUG fs/udf/misc.c:286:udf_read_tagged: location mismatch block
    256, tag 3274178688 != 256
    UDF-fs DEBUG fs/udf/super.c:1262:udf_load_partition: No Anchor block found
    UDF-fs: No partition found (1)
    found reiserfs format "3.6" with standard journal
    Reiserfs journal params: device ide/host0/bus0/target0/lun0/par, size
    8192, journal first block 18, max trans len 1024, max batch 900, max
    commit age 30, max trans age 30
    reiserfs: checking transaction log (ide/host0/bus0/target0/lun0/par) for
    (ide/host0/bus0/target0/lun0/par)
    Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 132k freed
    Adding 530136k swap on /dev/hda2. Priority:2 extents:1
    found reiserfs format "3.6" with standard journal
    Reiserfs journal params: device ide/host2/bus1/target0/lun0/par, size
    8192, journal first block 18, max trans len 1024, max batch 900, max
    commit age 30, max trans age 30
    reiserfs: checking transaction log (ide/host2/bus1/target0/lun0/par) for
    (ide/host2/bus1/target0/lun0/par)
    Using r5 hash to sort names
    eth0: Media Link On 100mbps full-duplex
    hda: set_drive_speed_status: status=0x58 { DriveReady SeekComplete
    DataRequest }
    blk: queue c048ba9c, I/O limit 4095Mb (mask 0xffffffff)
    blk: queue c048d4c4, I/O limit 4095Mb (mask 0xffffffff)
    hda: dma_timer_expiry: dma status == 0x60
    hda: timeout waiting for DMA
    hda: timeout waiting for DMA
    hda: (__ide_dma_test_irq) called while not waiting


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:35    [W:0.045 / U:2.068 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site