Messages in this thread | | | Date | Thu, 08 May 2003 02:12:17 -0400 | From | David Ford <> | Subject | 2.5.69, IDE problems |
| |
hda: dma_timer_expiry: dma status == 0x24 drivers/ide/ide-io.c:108: spin_lock(drivers/ide/ide.c:c04fb648) already locked by drivers/ide/ide-io.c/948 drivers/ide/ide-io.c:990: spin_unlock(drivers/ide/ide.c:c04fb648) not locked hda: lost interrupt hda: dma_intr: bad DMA status (dma_stat=30) hda: dma_intr: status=0x50 { DriveReady SeekComplete }
hda: dma_timer_expiry: dma status == 0x24 drivers/ide/ide-io.c:108: spin_lock(drivers/ide/ide.c:c04fb648) already locked by drivers/ide/ide-io.c/948 drivers/ide/ide-io.c:990: spin_unlock(drivers/ide/ide.c:c04fb648) not locked hda: lost interrupt hda: dma_intr: bad DMA status (dma_stat=30) hda: dma_intr: status=0x50 { DriveReady SeekComplete }
Got these messages while compiling XFree86.
# lspci (trimmed) 00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge 00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] 00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
# hdparm -v /dev/ide/host0/bus0/target0/lun0/disc
/dev/ide/host0/bus0/target0/lun0/disc: multcount = 16 (on) IO_support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) geometry = 12009/16/63, sectors = 78165360, start = 0
# hdparm -I /dev/ide/host0/bus0/target0/lun0/disc
/dev/ide/host0/bus0/target0/lun0/disc:
ATA device, with non-removable media Model Number: WDC WD400BB-00CAA1 Serial Number: WD-WMA8F2412631 Firmware Revision: 17.07W17 Standards: Supported: 5 4 3 2 Likely used: 6 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 78165360 device size with M = 1024*1024: 38166 MBytes device size with M = 1000*1000: 40020 MBytes (40 GB) Capabilities: LBA, IORDY(can be disabled) bytes avail on r/w long: 40 Queue depth: 1 Standby timer values: spec'd by Standard, with device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Recommended acoustic management value: 128, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set SMART feature set * Device Configuration Overlay feature set Automatic Acoustic Management feature set SET MAX security extension * DOWNLOAD MICROCODE cmd * SMART self-test * SMART error logging Security: supported not enabled not locked not frozen not expired: security count not supported: enhanced erase HW reset results: CBLID- below Vih Device num = 0 determined by the jumper Checksum: correct
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |