Messages in this thread | | | Subject | Re: USB not working with 2.5.69, worked with .68 | From | Stian Jordet <> | Date | 06 May 2003 01:07:02 +0200 |
| |
man, 05.05.2003 kl. 23.51 skrev Greg KH: > On Mon, May 05, 2003 at 10:54:20PM +0200, Stian Jordet wrote: > > > > I have read somewhere that the USB device not accepting new address > > means that the host-controller doesn't get an interrupt, and that this > > often is because of ACPI. It's just the same with acpi disabled (and in > > 2.5.68 it did work with and without acpi). > > Hm, can you look at /proc/interrups and verify that the usb controller's > interrupt count is going up? It really sounds like the interrupt isn't > getting through to the usb controller driver.
*argh* I hate this. Earlier I only tried to disable acpi, I had to disable MPS1.4 in the BIOS as well. Now it works. But, I can't turn my computer off without acpi. This worked with 2.5.68, so something has changed, but I guess you aren't the one to blame, then.
Thanks for answering, and sorry I didn't find this out earlier. But it works with acpi in 2.5.68, that's what's bugging me :)
Best regards, Stian
A little off-topic rant about my motherboard:
I have a ASUS CUV266-DLS motherboard. Dual P3, integrated SCSI and ethernet. Since it is smp, I have to use ACPI to power it off.
* With kernel 2.5.69, and ACPI enabled, usb doesn't work.
* With earlier ACPI enabled kernels, and secondary ide disabled in bios, usb doesn't work.
* Without ACPI, no kernel will boot with secondary ide enabled.
It's not easy..
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |