Messages in this thread | | | Subject | Re: 21rc6 serverworks IDE blows even more than is usual :) | From | Duncan Laurie <> | Date | Thu, 29 May 2003 15:25:57 -0700 |
| |
On Thu, 29 May 2003 13:40:01 +0200, Tomas Szepe <szepe@pinerecords.com> wrote: > > I can't seem to get the onboard Serverworks CSB5 IDE controller (rev 93) > in a Compaq Proliant ML350 G3 to work (reliably/at all) no matter what > kernel I use: >
Hi Tomas,
This problem *may* actually be in the hardware... IIRC the CSB5 rev 93h is the A2.1 version of the chip which had big problems with DMA. The workaround options included a messy rework of the PCB or forcing it into PIO mode, so we decided instead to just stick with the A2.0 revision. :)
However all of my knowledge about this particular issue is based on >1yr old information, so if you want to send the output of "lspci -xxx" for pci devices 00:0f.0 and 00:0f.1 I will check them over for any obvious settings the BIOS may have missed.
-duncan
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |