Messages in this thread | | | Subject | Re: siimage driver status | From | Alan Cox <> | Date | 29 May 2003 14:54:25 +0100 |
| |
On Iau, 2003-05-29 at 15:32, Wm. Josiah Erikson wrote: > hard drives that I'm trying to get to work with linux 2.4.21-rc6. The > problem I'm having is that it's REALLY slow and crashy. The kernel reports > this on bootup:
I'm running the siimage driver fine with several drives. Your setup is intriguing in that the BIOS has chosen to leave the drives in PIO mode
> SiI3112 Serial ATA: IDE controller at PCI slot 01:0b.0 > SiI3112 Serial ATA: chipset revision 2 > SiI3112 Serial ATA: not 100% native mode: will probe irqs later > ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio > ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio
Really the SATA drives ought to have come up in UDMA
> everything else on my system to a temporary halt, and hdparm -t reports > about 1.3MB/sec reads. This is a bummer, as I was hoping to RAID 0 them > together and make them my boot drives :) > > If I try and enable DMA, the machine instantly hardlocks.
Thats with hdparm -X66 -d1 ?
The only updates to the siimage driver are those in 2.4.21-ac which you shouldn't need.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |