lkml.org 
[lkml]   [2003]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectLinux 2.5.70 Massive ACPI Error Scroll

Hi,

I've tested 2.5.70 with ACPI on a new Dual-Xeon Box and I get massive scroll
from ACPI errors during bootup. The backtrace below is printed exactly
100 times during each bootup, which is not a nice sight. When booting with
a slow serial console, the system takes ages to boot.

The whole dmesg output of the boot process can be found at the following
URL: http://hell.wh8.tu-dresden.de/cerberus.txt

Regards,
-Udo.


ACPI: Subsystem revision 20030522
irq 9: nobody cared!
Call Trace:
[<c010b4a2>] handle_IRQ_event+0x87/0xf7
[<c010b758>] do_IRQ+0xbe/0x17b
[<c0109b78>] common_interrupt+0x18/0x20
[<c010be45>] setup_irq+0xc3/0xff
[<c022bb36>] acpi_irq+0x0/0x16
[<c022bb36>] acpi_irq+0x0/0x16
[<c010b8be>] request_irq+0xa9/0xde
[<c022bb86>] acpi_os_install_interrupt_handler+0x3a/0x59
[<c022bb36>] acpi_irq+0x0/0x16
[<c022bb36>] acpi_irq+0x0/0x16
[<c022fb49>] acpi_ev_install_sci_handler+0x1a/0x1e
[<c022fb0c>] acpi_ev_sci_xrupt_handler+0x0/0x18
[<c022f58b>] acpi_ev_handler_initialize+0x6/0x6e
[<c024056e>] acpi_enable_subsystem+0x2b/0x58
[<c03e964c>] acpi_bus_init+0x7a/0x115
[<c03e973d>] acpi_init+0x56/0xa6
[<c03d685a>] do_initcalls+0x28/0x94
[<c0130660>] init_workqueues+0xf/0x26
[<c01050c9>] init+0x5a/0x1d1
[<c010506f>] init+0x0/0x1d1
[<c0107075>] kernel_thread_helper+0x5/0xb

handlers:
[<c022bb36>] (acpi_irq+0x0/0x16)

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2005-03-22 13:35    [W:0.028 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site