lkml.org 
[lkml]   [2003]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFR] a new SCSI driver
> Serial ATA is looming quickly on the horizon.  Both device and host
> controller SATA implementations really lend themselves to behaviors
> that have existed in SCSI for a while. SATA even defines use of SCSI
> Enclosure Services.

Thinking ahead, by the 2.8 timescale, PATA could well be legacy hardware
which could be supported only by an 'old' IDE driver, much like we already
have at the moment - I.E. we could remove the current 'old' IDE driver
sometime during the 2.7 timescale, and support SATA only via the SCSI layer.

This would save having any more than the minimum SATA code going in to the
existing IDE driver, and consolidate work in the future.

The bloat of the SCSI layer in embedded machines might be a concern, but
then again, maybe it won't - how many embedded machines are going to be
using SATA, anyway? Once we move away from spinning disks towards solid
state storage, (which is going to happen first in the embedded market),
will we want to use *ATA or SCSI at all?

John
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:35    [W:0.090 / U:3.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site