lkml.org 
[lkml]   [2003]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 2.4.21-rc1-ac2 Promise IDE DMA won't work
Date
Tabris wrote:
> On Tuesday 29 April 2003 04:15 pm, Andre Hedrick wrote:
>
>>The Promise chipset use a second DMA engine at offset 0x24 respective
>>of the channel. Mixing an ATA and ATAPI on that channel is almost
>>impossible to make the corner cases work. Next, if there us a 48-bit
>>ATA plus ATAPI on the channel popping between the two enignes does
>>not look sane at all because one has to swithc the location of the
>>hwif->sgtable.
>
>
> Ok... moved the HDDs from the VIA secondary to the PDC primary (tried
> moving both, but it seems that ide=reverse doesn't work), and the
> CD-R/W to the VIA secondary.
>
> good news, regular reads seem to use the DMA engine. bad news, CDDA
> ripping (using cdparanoia) does not.
>
> is this a known issue? (i thought that CDDA ripping had been fixed)
>

Have you tried Andrew Morton's ide-cd dma patch? It seems to have
worked well for me, at least. A summary of what it does is included at
the top of the patch.

http://www.zipworld.com.au/~akpm/linux/patches/2.4/2.4.20/ide-akpm.patch

Perhaps Alan might considier it for the -rc2 ac patch?

Cheers,
Nicholas


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:35    [W:0.066 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site