lkml.org 
[lkml]   [2003]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectIEEE-1394 problem on init [ was Re: Linux 2.4.21-rc1 ]
    Stelian

    Similiar problem here. Machine boots fine, but when I plug my DV
    camera in I can't cat /proc/bus/ieee1394/ devices, and I get looping
    messages in dmesg. If I move the 1394 drivers from pre-7 in, all works
    fine.
    (Thanks Dan). I submitted my logs and hw info to:
    http://sourceforge.net/mailarchive/forum.php?thread_id=2009188&forum_id=5387

    Tony

    >Something gone wrong with this changes. My Sony Vaio Picturebook C1VE
    >hangs on boot when the firewire controller is probed by the init
    >scripts.

    >This happens exactly in the sequence:
    > modprobe ohci1394
    > grep something /proc/bus/ieee1394/devices
    >I'm not sure yet if the lockup is related to the ohci1394
    initialisation
    >or the read in /proc possibly eariler than the driver expects.
    >
    >The kernel still reacts to sysrq (umount/sync etc), however
    task/memory/pc
    >sysrq function do NOT work...
    >
    >I'll investigate a bit further on this today.
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:34    [W:0.034 / U:29.812 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site