Messages in this thread | | | Subject | Re: 3c59x gives HWaddr FF:FF:... | From | Felipe Alfaro Solana <> | Date | 30 Mar 2003 12:19:37 +0200 |
| |
On Sun, 2003-03-30 at 04:21, Juan Quintela wrote: > In my experience, that bug is related with acpi. In a kernel compiled > without acpi, the card works perfectly, in a kernel compiled with acpi > it depend on the phase of the moon and similar things :(
I'm not using ACPI but APM and, on a vanilla 2.4.20 kernel, that's what I'm seeing with my 3CCFE575CT on my kernel dmesg ring:
<snip> Yenta IRQ list 08d8, PCI irq5 Socket status: 30000020 Yenta IRQ list 08d8, PCI irq10 Socket status: 30000006 cs: cb_alloc(bus 6): vendor 0x10b7, device 0x5257 PCI: Failed to allocate resource 0(1000-2c3) for 06:00.0 PCI: Enabling device 06:00.0 (0000 -> 0003) <snip> eth0: command 0x5800 did not complete! Status=0xffff eth0: command 0x2804 did not complete! Status=0xffff <snip>
However, Alan Cox patches for 2.4.20 and Red Hat's linux kernel both seem to work OK... I think it's related to PCI resource assignment.
________________________________________________________________________ Felipe Alfaro Solana Linux Registered User #287198 http://counter.li.org
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |