lkml.org 
[lkml]   [2003]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectAdaptec drivers causing problem in RHL 8.0
Hi All,

May be you will say that this has been answered somewhere, but I am not
really able to understand what to do?

I recently installed RHL 8.0 on a SGI1200 server. The server has
"Adaptec AIC-7896 SCSI BIOS v2.20S1B1" installed.

When I boot the system, the two SCSI channels are recognised, and then the
system is not able to initialise. The partial error codes are:

aic7xxx_abort returns 0x2002
SCSI 0:0:0:0: Attempting to queue TARGET RESET message
SCSI 0:0:0:0: Is not an active device

The system then probes the SCSI 0:0:1:0 channel upto SCSI 0:0:15:0 and
then goes for SCSI channel 2, for all the 15 devices.

Can anyone please tell me what should I do? The system was earlier running
on RHL 6.2

Thanx in advance.
With Best Regards
HimS

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:33    [W:0.102 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site