lkml.org 
[lkml]   [2003]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject2.6.0-test11:ide-disk partitions not mountable
Date
I have two ide-controllers, one onboard (VIA vt8233a) and one as pci-card 
(Promise ultra100 tx2). The following drives are attached:

Controller1:
/dev/ide/host0/bus0/target0/lun0/disc ibm harddisk (hda)
/dev/ide/host0/bus1/target0/lun0/cd ide cd-writer
/dev/ide/host0/bus1/target1/lun0/cd ide dvd-rom

Controller2:
/dev/ide/host2/bus1/target0/lun0/disc maxtor harddisk (hde)
/dev/ide/host2/bus1/target1/lun0/disc maxtor harddisk (hdg)

The system (debian unstable) boots from an raid0 on hde/hdg. hda can be
accesed by parted,fdsik etc., partitions and filesystems can be created. But
when i try to mount any partiton on hda i get:

mount: /dev/hda2 already mounted or /mnt/hda2/ busy

which it isn`t (cat /proc/mounts). All partitions can be mounted under 2.4
kernels.

Is it now necessary to use kernel option "Boot off-board chipsets first
support" for this kind of setup?

Bye, Matthias
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:59    [W:0.717 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site