lkml.org 
[lkml]   [2003]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Not able to load megaraid module after kernel upgrade from 2.4.9-e2 to 2.4.9-e25
> Hello I am running dell Power Edge 12600, with Firmware 1.68,
> I have a Perc 4/Si RAID Controller BIOS version 1.04 FW 2.27 (the last
> version)
> When starting up, the bios can recognize the disk array with no problem, the
> server starts booting OK, but when it gets to load the megaraid module, it
> brakes:

The Linux-PowerEdge@dell.com list may be more appropriate for this
type of question. Subscribe at http://lists.us.dell.com/.

For the Red Hat kernel you mention, you want /etc/modules to list the
megaraid_2002 driver, not plain megaraid. Then remake your initial
ramdisk such that the megaraid_2002 driver gets picked up and used at
next boot.

Thanks,
Matt

--
Matt Domsch
Sr. Software Engineer, Lead Engineer
Dell Linux Solutions www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:59    [W:0.181 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site