lkml.org 
[lkml]   [2003]   [Nov]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: IDE DMA setting not available on 2.4.23 as a module
Date

Do you have piix.o module loaded or PIIX support compiled-in?

--bart

On Sunday 30 of November 2003 20:58, Santiago Garcia Mantinan wrote:
> Hi!
>
> Yesterday I started to upgrade my systems to 2.4.23, some of them were
> already running pre or rc versions, but when I tried my Pentium MMX wich
> boots out of SCSI and on which I like to have IDE driver as a module, I
> found that the DMA setting was not working, hdparm was saying:
>
> setting using_dma to 1 (on)
> HDIO_SET_DMA failed: Operation not permitted
>
> So I changed the driver option to set DMA by default to ON, but nothing
> changed, still the same problem, then I tried to compile the IDE driver
> into the kernel instead of having it as a module and then the dma support
> started to work, either having the driver enable it by default or by
> setting it with hdparm.
>
> The motherboard uses a 430TX chipset, thus with a PIIX4 IDE controller.
>
> Is this a bug or is this a known and accepted limitation of having the IDE
> driver as a module?
>
> If you want me to test any patch to see if we can fix this, or need any
> more info, don't hesitate to contact me.
>
> Regards...

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:59    [W:0.022 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site