Messages in this thread | | | Date | Sat, 29 Nov 2003 10:40:18 +0200 | From | Vladimir Klenov <> | Subject | aic7xxx problem on sparc64 (2.6) |
| |
>I inserted my known working 2940 (7880) into a Sun Ultra 5 (32-bit PCI). >modprobe aic7xxx gave some errors and asked to report the bug. >modprobe sd_mod gave a lot more errors and put the disk offline. The >same hardware (host, HBA and disk) works fine with latest 2.4 kernel >(2.4.23-rc5 currently). The problem is with 2.6.0-test11.
similar problem with -test11 and aic79xx on x86 2.4 works ok, test11 give unrecoverable read errors, but with drivers from http://people.FreeBSD.org/~gibbs/linux/SRC/ -test11 working fine.
do I have chance to include working drivers to official tree? ;)
I use software raid1 over two scsi drives.
lspci: 02:06.0 SCSI storage controller: Adaptec ASC-29320LP U320 (rev 03)
dmesg: scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 2.0.4 <Adaptec 29320LP Ultra320 SCSI adapter> aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI 33 or 66Mhz, 512 SCBs
(scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) (scsi0:A:1): 320.000MB/s transfers (160.000MHz DT|IU|QAS, 16bit) Vendor: IBM Model: IC35L036UCDY10-0 Rev: S21E Type: Direct-Access ANSI SCSI revision: 03 Vendor: IBM Model: IC35L036UCDY10-0 Rev: S21E Type: Direct-Access ANSI SCSI revision: 03 SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB) SCSI device sda: drive cache: write back
SY, Vladimir - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |