lkml.org 
[lkml]   [2003]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: 2.6.0-test9-mm4 (does not boot)
Date
Op Thursday 20 November 2003 11:34, schreef Frank Dekervel:
> pnpbios says something like this:
>  found installation structure 0xc00f5560
>  version 1.0 entry 0xf0000:0x6149 dseg 0xf0000
>
> i'm going to try without pnpbios i think.
>
> my working 2.6.0test9 also has pnpbios setup:
> kervel@bakvis:~$ cat /boot/config-2.6.0-test9 | grep -i pnpbios
> CONFIG_PNPBIOS=y

ok, replying to myself to be more specific:

working pnpbios gives this:
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f5560
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x614a, dseg 0xf0000
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
SCSI subsystem initialized

mm4 pnpbios gives the same numbers, but never says
PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
instead it says general protection fault

sorry,
greetings,
frank


--
Frank Dekervel - frank.dekervel@student.kuleuven.ac.be
Mechelsestraat 88
3000 Leuven (Belgium)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:58    [W:0.063 / U:0.740 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site