Messages in this thread | | | Date | Mon, 06 Oct 2003 21:30:42 -0600 | From | Anthony Best <> | Subject | Yenta CardBus problem. 2.6.0-test6 |
| |
Errors on boot.
Also system locks up when a PCMCIA card is removed.
[abest@lizard abest]$ dmesg Linux version 2.6.0-test6 (root@lizard.localdomain) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #6 Mon Sep 29 18:55:01 MDT 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c0000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fef0000 (usable) BIOS-e820: 000000001fef0000 - 000000001feff000 (ACPI data) BIOS-e820: 000000001feff000 - 000000001ff00000 (ACPI NVS) BIOS-e820: 000000001ff00000 - 0000000020000000 (usable) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 512MB LOWMEM available. On node 0 totalpages: 131072 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126976 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Sony Vaio laptop detected. ACPI: RSDP (v000 PTLTD ) @ 0x000f7700 ACPI: RSDT (v001 SONY K5 0x06040000 LTP 0x00000000) @ 0x1fef9d68 ACPI: FADT (v001 SONY K5 0x06040000 PTL_ 0x000f4240) @ 0x1fefee2b ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1fefee9f ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x1fefeec7 ACPI: DSDT (v001 SONY K5 0x06040000 MSFT 0x0100000d) @ 0x00000000 Building zonelist for node : 0 Kernel command line: ro root=LABEL=/ hdc=ide-scsi pci=usepirqmask ide_setup: hdc=ide-scsi Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1400.257 MHz processor. Console: colour VGA+ 80x25 Memory: 515148k/524288k available (1732k kernel code, 8332k reserved, 711k data, 232k init, 0k highmem) Calibrating delay loop... 2760.70 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD mobile AMD Athlon(tm) XP 1600+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfd7cd, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0 divert: not allocating divert_blk for non-ethernet device lo SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) ikconfig 0.7 with /proc/config* VFS: Disk quotas dquot_6.5.1 Initializing Cryptographic API Applying VIA southbridge workaround. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found pty: 2048 Unix98 ptys configured Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0x1c40-0x1c47, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1c48-0x1c4f, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23DA-20, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: UJDA730 DVD/CDRW, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(100) hda: hda1 hda2 hda3 ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 EISA: Probing bus 0 at eisa0 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 RAMDISK: Compressed image found at block 0 Freeing initrd memory: 194k freed VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 232k freed drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1PCI: Found IRQ 9 for device 0000:00:07.2 PCI: Sharing IRQ 9 with 0000:00:07.3 PCI: Sharing IRQ 9 with 0000:00:0e.0 uhci-hcd 0000:00:07.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:07.2 to 64 uhci-hcd 0000:00:07.2: irq 9, io base 00001c00 uhci-hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 9 for device 0000:00:07.3 PCI: Sharing IRQ 9 with 0000:00:07.2 PCI: Sharing IRQ 9 with 0000:00:0e.0 uhci-hcd 0000:00:07.3: UHCI Host Controller PCI: Setting latency timer of device 0000:00:07.3 to 64 uhci-hcd 0000:00:07.3: irq 9, io base 00001c20 uhci-hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver EXT3 FS on hda2, internal journal Adding 522104k swap on /dev/hda3. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SCSI subsystem initialized scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MATSHITA Model: UJDA730 DVD/CDRW Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 kudzu: numerical sysctl 1 23 is obsolete. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport0: cpp_daisy: aa5500ff(38) parport0: assign_addrs: aa5500ff(38) parport_pc: Via 686A parallel port: io=0x378 ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org> PCI: Found IRQ 9 for device 0000:00:0e.0 PCI: Sharing IRQ 9 with 0000:00:07.2 PCI: Sharing IRQ 9 with 0000:00:07.3 PCI: Setting latency timer of device 0000:00:0e.0 to 64 ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[9] MMIO=[e8004000-e80047ff] Max Packet=[2048] ip_tables: (C) 2000-2002 Netfilter core team ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460301308bbc] 8139too Fast Ethernet driver 0.9.26 PCI: Assigned IRQ 10 for device 0000:00:10.0 PCI: Sharing IRQ 10 with 0000:00:07.5 PCI: Sharing IRQ 10 with 0000:00:07.6 PCI: Sharing IRQ 10 with 0000:00:0a.1 divert: allocating divert_blk for eth0 eth0: RealTek RTL8139 at 0xe0897800, 08:00:46:6f:42:6b, IRQ 10 eth0: Identified 8139 chip type 'RTL-8139C' eth0: link down Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] irq 5: nobody cared! Call Trace: [<c010c7da>] __report_bad_irq+0x2a/0x90 [<c010c8d0>] note_interrupt+0x70/0xa0 [<c010cb79>] do_IRQ+0x139/0x170 [<c010af24>] common_interrupt+0x18/0x20 [<c0121740>] do_softirq+0x40/0xa0 [<c010cb56>] do_IRQ+0x116/0x170 [<c010af24>] common_interrupt+0x18/0x20 [<c010d11e>] setup_irq+0x9e/0xf0 [<c023afc0>] pcibios_test_irq_handler+0x0/0x10 [<c010cc56>] request_irq+0xa6/0xe0 [<c023b385>] pcibios_lookup_irq+0x3b5/0x460 [<c023afc0>] pcibios_test_irq_handler+0x0/0x10 [<c023b4be>] pirq_enable_irq+0x7e/0x100 [<c023ba48>] pcibios_enable_device+0x28/0x60 [<c01c40ab>] pci_enable_device_bars+0x2b/0x40 [<c01c40d7>] pci_enable_device+0x17/0x20 [<e091ec76>] yenta_probe+0x76/0x240 [yenta_socket] [<c016aaa2>] dput+0x22/0x220 [<c01c6332>] pci_device_probe_static+0x52/0x70 [<c01c638c>] __pci_device_probe+0x3c/0x50 [<c01c63cc>] pci_device_probe+0x2c/0x50 [<c01eec6f>] bus_match+0x3f/0x70 [<c01eedbf>] driver_attach+0x6f/0xa0 [<c01ef05d>] bus_add_driver+0x8d/0xa0 [<c01ef4df>] driver_register+0x2f/0x40 [<c01c65bf>] pci_register_driver+0x5f/0x90 [<e089000f>] yenta_socket_init+0xf/0x13 [yenta_socket] [<c01345fc>] sys_init_module+0x12c/0x250 [<c010ad65>] sysenter_past_esp+0x52/0x71 handlers: [<c023afc0>] (pcibios_test_irq_handler+0x0/0x10) Disabling IRQ #5 PCI: Found IRQ 5 for device 0000:00:0a.0 Yenta: CardBus bridge found at 0000:00:0a.0 [104d:80f6] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI irq 5: nobody cared! Call Trace: [<c010c7da>] __report_bad_irq+0x2a/0x90 [<c010c8d0>] note_interrupt+0x70/0xa0 [<c010cb79>] do_IRQ+0x139/0x170 [<c010af24>] common_interrupt+0x18/0x20 [<c0121740>] do_softirq+0x40/0xa0 [<c010cb56>] do_IRQ+0x116/0x170 [<c010af24>] common_interrupt+0x18/0x20 [<c010d11e>] setup_irq+0x9e/0xf0 [<e091d8c0>] yenta_interrupt+0x0/0x40 [yenta_socket] [<c010cc56>] request_irq+0xa6/0xe0 [<e091ed86>] yenta_probe+0x186/0x240 [yenta_socket] [<e091d8c0>] yenta_interrupt+0x0/0x40 [yenta_socket] [<c01c6332>] pci_device_probe_static+0x52/0x70 [<c01c638c>] __pci_device_probe+0x3c/0x50 [<c01c63cc>] pci_device_probe+0x2c/0x50 [<c01eec6f>] bus_match+0x3f/0x70 [<c01eedbf>] driver_attach+0x6f/0xa0 [<c01ef05d>] bus_add_driver+0x8d/0xa0 [<c01ef4df>] driver_register+0x2f/0x40 [<c01c65bf>] pci_register_driver+0x5f/0x90 [<e089000f>] yenta_socket_init+0xf/0x13 [yenta_socket] [<c01345fc>] sys_init_module+0x12c/0x250 [<c010ad65>] sysenter_past_esp+0x52/0x71 handlers: [<e091d8c0>] (yenta_interrupt+0x0/0x40 [yenta_socket]) Disabling IRQ #5 Yenta: ISA IRQ list 0808, PCI irq5 Socket status: 30000059 PCI: Assigned IRQ 5 for device 0000:00:0a.1 PCI: Sharing IRQ 5 with 0000:00:07.5 PCI: Sharing IRQ 5 with 0000:00:07.6 PCI: Sharing IRQ 5 with 0000:00:10.0 Yenta: CardBus bridge found at 0000:00:0a.1 [104d:80f6] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta: ISA IRQ list 0808, PCI irq5 Socket status: 30000006 cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x388-0x38f 0x3c0-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. orinoco.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others) orinoco_cs.c 0.13e (David Gibson <hermes@gibson.dropbear.id.au> and others) divert: allocating divert_blk for eth1 eth1: Station identity 001f:0001:0008:000a eth1: Looks like a Lucent/Agere firmware version 8.10 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address 00:02:2D:90:B1:71 eth1: Station name "HERMES I" eth1: ready eth1: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver divert: not allocating divert_blk for non-ethernet device sit0 Via 686a/8233/8235 audio driver 1.9.1-ac3-2.5 PCI: Found IRQ 5 for device 0000:00:07.5 PCI: Sharing IRQ 5 with 0000:00:07.6 PCI: Sharing IRQ 5 with 0000:00:0a.1 PCI: Sharing IRQ 5 with 0000:00:10.0 PCI: Setting latency timer of device 0000:00:07.5 to 64 ac97_codec: AC97 Audio codec, id: ADS72 (Analog Devices AD1881A) via82cxxx: board #1 at 0x1000, IRQ 5 eth0: link down eth1: New link status: Connected (0001) eth1: no IPv6 routers present
-- Anthony Best <abest@digitalflex.net> Consultant, DigitalFlex LLC 801-541-5013
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |