Messages in this thread |  | | | Date | Sat, 04 Oct 2003 16:44:45 +0200 | | From | Philippe Lochon <> | | Subject | P4C800E-Dlx: ICH5/S-ATA and Intel Pro onboard network incompatibility ? |
| |
Hi,
I'm running Mandrake 9.2RC1 (kernel 2.4.22) and I can't make work S-ATA boot drive and Intel Pro onboard network.
The Asus P4C800E-Dlx in the only mainboard in the P4x800 family with ICH5R and Intel 82547EI (Gb onboard chip, it uses e1000 driver).
The chips share the same IRQ : # grep eth0 /proc/interrupts 17: 83 IO-APIC-level Intel ICH5, eth0 (note that there's no error about this in syslog)
1) Boot on S-ATA drive / Mandrake 9.2RC1 with "acpi=off" -> boot OK, but no ping, "NETDEV WATCHDOG: eth0: transmit timed out" in syslog. (full log and config on http://plochon.free.fr/mdk92RC1.html )
2) Boot on S-ATA drive / Mandrake 9.2RC1 with "acpi=off" and "noapic" -> boot hang (when displays "hde: attached ide_disk driver" where hde is the S-ATA boot drive)
3) Same tests but boot on CD with Knoppix 3.3 (Kernel 2.4.22) -> same results
4) S-ATA drive physically removed, boot on CD / Knoppix 3.3 with "acpi=off" and "noapic" -> boot OK, network OK : it works !
Is there a way to make S-ATA and Intel Pro work together, or is it an incompatibility ?
Thanks, Philippe
My hardware configuration: P4C800E-Dlx, P4C@2.6Ghz, 256Mb, 1 Seagate S-ATA drive plugged on standard S-ATA connector (-> not on S-ATA RAID connector) IDE Bios settings : Onboard IDE operate mode : Enhanced mode Enhanced mode support on : S-ATA Configure S-ATA as RAID : No
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |