Messages in this thread | | | Date | Fri, 31 Oct 2003 01:40:21 +0100 | From | Nico Schottelius <> | Subject | APM not available, ACPI does not find battery |
| |
Hello!
What todo when I don't have an APM bios and the acpi directories ac_adapter and battery are empty?
And howto use the 'email' and 'web' buttons?
Greetings,
Nico
Please CC replies to me. Linux scice 2.6.0-test9 #1 Wed Oct 29 13:28:17 CET 2003 i686 GNU/Linux [unhandled content-type:application/octet-stream]Linux version 2.6.0-test9 (root@scice) (gcc version 3.3.2 (Debian)) #1 Wed Oct 29 13:28:17 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000095c00 (usable) BIOS-e820: 0000000000095c00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000eff0000 (usable) BIOS-e820: 000000000eff0000 - 000000000eff8000 (ACPI data) BIOS-e820: 000000000eff8000 - 000000000f000000 (ACPI NVS) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 239MB LOWMEM available. On node 0 totalpages: 61424 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 57328 pages, LIFO batch:13 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fad50 ACPI: RSDT (v001 AMIINT AMIINT09 0x00000011 MSFT 0x00000097) @ 0x0eff0000 ACPI: FADT (v001 AMIINT AMIINT09 0x00000011 MSFT 0x00000097) @ 0x0eff0030 ACPI: DSDT (v001 TM5600 TMx86 0x00001000 MSFT 0x0100000d) @ 0x00000000 Building zonelist for node : 0 Kernel command line: video="sis:accel,xres:1024,yres:768,bpp:16" No local APIC present or hardware disabled Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 598.888 MHz processor. Console: colour VGA+ 80x25 Memory: 238892k/245696k available (2434k kernel code, 6068k reserved, 663k data, 328k init, 0k highmem) Calibrating delay loop... 1101.82 BogoMIPS Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0084893f 0081813f 00000000 00000000 CPU: After vendor identify, caps: 0084893f 0081813f 0000000e 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 512K (128 bytes/line) CPU: Processor revision 1.3.2.1, 600 MHz CPU: Code Morphing Software revision 4.2.7-8-278 CPU: 20011004 02:04 official release 4.2.7#7 CPU serial number disabled. CPU: After all inits, caps: 0080893f 0081813f 0000000e 00000000 CPU: Transmeta(tm) Crusoe(tm) Processor TM5600 stepping 03 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfda61, last bus=0 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 ACPI: IRQ 4 was Edge Triggered, setting to Level Triggerd ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 14 15) ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 ACPI: No IRQ known for interrupt pin A of device 0000:00:10.0 ACPI: PCI Interrupt Link [LNKP] enabled at IRQ 10 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' sisfb: Video ROM found and mapped to c00c0000 sisfb: Framebuffer at 0xd0000000, mapped to 0xcf80a000, size 16384k sisfb: MMIO at 0xeffc0000, mapped to 0xd080b000, size 256k sisfb: Memory heap starting at 8192K sisfb: Using MMIO queue mode sisfb: SiS301LV bridge detected (revision 0xd1) sisfb: Default mode is 800x600x8 (60Hz) sisfb: Added MTRRs sisfb: Installed SISFB_GET_INFO ioctl (80046ef8) sisfb: 2D acceleration is enabled, scrolling mode ypan fb0: SIS 315PRO frame buffer device, Version 1.6.01 ikconfig 0.7 with /proc/config* VFS: Disk quotas dquot_6.5.1 devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 SGI XFS for Linux with ACLs, no debug enabled SGI XFS Quota Management subsystem Initializing Cryptographic API sisfb: Change mode to 800x600x8-60Hz Console: switching to colour frame buffer device 100x37 pty: 256 Unix98 ptys configured Linux agpgart interface v0.100 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 at 0xd084ce00, 00:0a:e6:ba:f6:c2, IRQ 5 eth0: Identified 8139 chip type 'RTL-8100B/8139D' HDLC support module revision 1.16 Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: FUJITSU MHS2030AT, ATA DISK drive hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63 /dev/ide/host0/bus0/target0/lun0: p1 p2 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.12 Console: switching to colour frame buffer device 100x37 mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 Synaptics Touchpad, model: 1 Firmware: 5.8 Sensor: 29 new absolute packet format Touchpad has extended capability bits -> 4 multi-buttons, i.e. besides standard buttons -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 serio: i8042 AUX3 port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 BIOS EDD facility v0.10 2003-Oct-11, 1 devices found Please report your BIOS at http://domsch.com/linux/edd30/results.html ACPI: (supports S0 S1 S3 S4 S5) found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda2) for (hda2) reiserfs: replayed 3 transactions in 0 seconds Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 328k freed Adding 248968k swap on /dev/discs/disc0/part1. Priority:-1 extents:1 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:0a.0: UHCI Host Controller uhci_hcd 0000:00:0a.0: irq 11, io base 0000de80 uhci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:0a.1: UHCI Host Controller uhci_hcd 0000:00:0a.1: irq 5, io base 0000df00 uhci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:14.0: OHCI Host Controller ohci_hcd 0000:00:14.0: irq 10, pci mem d0922000 ohci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ehci_hcd 0000:00:0a.2: EHCI Host Controller ehci_hcd 0000:00:0a.2: irq 9, pci mem d0924f00 ehci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:0a.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-13 hub 4-0:1.0: USB hub found hub 4-0:1.0: 4 ports detected drivers/usb/core/usb.c: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver hub 3-0:1.0: new USB device on port 1, assigned address 2 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 10 Disabled Privacy Extensions on device c03cfb80(lo) IPv6 over IPv4 tunneling driver Disabled Privacy Extensions on device ce8b3c00(sit0) eth0: no IPv6 routers present eth0: link down eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: link down eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: link down eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 eth0: link down eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 eth0: link down eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 eth0: link down eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Processor [CPU1] (supports C1, 8 throttling states) IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com> cpufreq: No CPUs supporting ACPI performance management found. [drm] Initialized sis 1.1.0 20030826 on minor 0 eth0: link down eth0: link up, 10Mbps, half-duplex, lpa 0x0000 spurious 8259A interrupt: IRQ7. atkbd.c: Unknown key pressed (translated set 2, code 0x11d, data 0x11, on isa0060/serio0). atkbd.c: Unknown key released (translated set 2, code 0x11d, data 0x91, on isa0060/serio0). hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE ide0: reset: success hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE ide0: reset: success hda: status timeout: status=0xd0 { Busy }
hda: no DRQ after issuing WRITE ide0: reset: success
| |