[lkml]   [2003]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: 3c59x problem with 2.4.6-test[34]
    Tom Rini <> wrote:
    > On Fri, Oct 24, 2003 at 12:43:56PM -0700, Andrew Morton wrote:
    > > Tom Rini <> wrote:
    > > >
    > > > Okay. First an odd part. When the card does not work, I didn't get
    > > > anything in the syslog with debug=7, but I did get plenty when it works.
    > >
    > > Well that's a big hint. If no debug output comes out then the driver
    > > simply isn't being executed. You'll need to investigate and report on this
    > > further. Make sure that you've set `dmesg -n 7' of course...
    > >From the original message, something is happening:
    > Sep 6 18:13:57 opus kernel: 0000:00:0e.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xe480. Vers LK1.1.19
    > Sep 6 18:13:57 opus vmunix: ***WARNING*** No MII transceivers found!

    Oh, OK, I didn't look at your initial message closely enough.

    Every register is coming up with 0xff, so the NIC isn't powered up. There
    have been a couple of reports of this.

    I don't know why this has changed from 2.4. Suggest you try disabling (or
    enabling) ACPI, and see if there are any BIOS settings which might affect

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:58    [W:0.018 / U:154.932 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site