Messages in this thread | | | Subject | Serial ATA on Dell Dimension 8300 (Was: Re: Serial ATA support in 2.4.22) | From | Martin List-Petersen <> | Date | Thu, 02 Oct 2003 23:42:51 +0200 |
| |
I've got trouble with both 2.4.22-ac1, ac4 and 2.4.22-bk25 + newest sata patch. (Debian Sid)
When i try to boot ac1 or ac4 from harddisk. The kernel would fail by endless stating: kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8 on screen.
Do i boot the same kernel from floppy or cd (syslinux/isolinux - dmesg for ac4 attached, bootet from cd) it boots without trouble, mounts the harddisk etc.
The machine is a Dell Dimension 8300 (practically the same as the Precision 360), with Intel 875 chipset (ICH5 SATA controllers). In bk25+sata patch reiserfs seems to be broken (dmesg attached), i will try an older version tomorrow.
I simply can't figure out, whats wrong here.
Regards, Martin List-Petersen martin at list-petersen dot se -- Microsoft DNS service terminates abnormally when it recieves a response to a DNS query that was never made. Fix Information: Run your DNS service on a different platform. -- BugTraq Linux version 2.4.22-bk25-20031002-odin (root@odin) (gcc version 3.3.2 20030908 (Debian prerelease)) #1 SMP tor okt 2 21:53:33 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff74000 (usable) BIOS-e820: 000000003ff74000 - 000000003ff76000 (ACPI NVS) BIOS-e820: 000000003ff76000 - 000000003ff97000 (ACPI data) BIOS-e820: 000000003ff97000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 hm, page 000fe000 reserved twice. hm, page 000ff000 reserved twice. hm, page 000f0000 reserved twice. On node 0 totalpages: 262004 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32628 pages. ACPI: RSDP (v000 DELL ) @ 0x000feb90 ACPI: RSDT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd1ca ACPI: FADT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd1fe ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc8937 ACPI: MADT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd272 ACPI: BOOT (v001 DELL 8300 0x00000007 ASL 0x00000061) @ 0x000fd2de ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) Using ACPI (MADT) for SMP configuration information Kernel command line: root=/dev/sda2 ro console=tty0 console=ttyS0,9600n8 BOOT_IMAGE=linux.bin Initializing CPU#0 Detected 2992.564 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 5976.88 BogoMIPS Memory: 1031936k/1048016k available (1977k kernel code, 15696k reserved, 655k data, 132k init, 130512k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#0. CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 per-CPU timeslice cutoff: 1462.91 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000040 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5976.88 BogoMIPS CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 Total of 2 processors activated (11953.76 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2992.4180 MHz. ..... host bus clock speed is 199.4944 MHz. cpu: 0, clocks: 1994944, slice: 664981 CPU0<T0:1994944,T1:1329952,D:11,S:664981,C:1994944> cpu: 1, clocks: 1994944, slice: 664981 CPU1<T0:1994944,T1:664976,D:6,S:664981,C:1994944> checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle ACPI: Subsystem revision 20030916 PCI: PCI BIOS revision 2.10 entry at 0xfbb30, last bus=2 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) PCI: Probing PCI hardware PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com> Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/100 Network Driver - version 2.3.18-k1 Copyright (c) 2003 Intel Corporation e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 00:1f.1 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA ICH5-SATA: IDE controller at PCI slot 00:1f.2 ICH5-SATA: chipset revision 2 ICH5-SATA: 100% native mode on irq 18 ide0: BM-DMA at 0xfea0-0xfea7, BIOS settings: hda:DMA, hdb:pio hda: ST3120026AS, ATA DISK drive hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50) hdb: probing with STATUS(0x00) instead of ALTSTATUS(0x50) blk: queue c041d460, I/O limit 4095Mb (mask 0xffffffff) hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive hdd: _NEC DVD+RW ND-1100A, ATAPI CD/DVD-ROM drive ide0 at 0xfe00-0xfe07,0xfe12 on irq 18 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=14589/255/63, UDMA(33) hdc: attached ide-cdrom driver. hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 hdd: attached ide-cdrom driver. hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 i2c-core.o: i2c core module version 2.8.0 (20030714) i2c-dev.o: i2c /dev entries driver module version 2.8.0 (20030714) i2c-proc.o version 2.8.0 (20030714) Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Cannot open root device "sda2" or 08:02 Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on 08:02 [unhandled content-type:application/octet-stream][unhandled content-type:application/pgp-signature] | |