lkml.org 
[lkml]   [2003]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: PCMCIA CD-ROM does not work
    Date

    Thanks a lot, I tried the parameters
    ide1=0x386,0x180 pci=off
    and it did not work. pci=off seems to have broken quite a lot (fb,
    jogdial, ...). Just leaving it away and just having ide1=0x386,0x180
    didn't help the CD-ROM drive either.

    I am now compiling the 2.4.19/20/21 kernels to try to figure out,
    where it broke. I have some suspicion that it happened when ide-cs.c
    was moved to legacy from drivers/ide.

    BTW, if it's legacy, what replaces it?

    Thom


    On Friday 10 October 2003 17:09, Dave Jones wrote:
    > On Fri, Oct 10, 2003 at 04:52:50PM +0200, Thom Borton wrote:
    > > Hello everybody
    > >
    > > I have a Sony Vaio PCG-Z600NE with an external PCMCIA 4x CD-ROM
    > > drive, which used to work perfectly until around 2.4.18. With
    > > later kernels I did not succeed to get it running. I tried
    > > extensively with 2.4.22. As far as I remember, 2.4.19-21 did not
    > > work either.
    > >
    > > I have attached the syslogs for 2.4.18, 2.4.22 and 2.6.0-test7.
    > >
    > > Any idea what's wrong? Thanks for the help.
    >
    > I'm not sure what broke it, but if you boot with "ide1=0x386,0x180
    > pci=off" it works again. Not a perfect solution, but until someone
    > does some digging to find out exactly when it broke, we're stuck.
    >
    > Dave

    --
    Thom Borton
    Switzerland
    Oct 10 17:30:43 grisu kernel: Yenta IRQ list 00b8, PCI irq9
    Oct 10 17:30:43 grisu kernel: Socket status: 30000416
    Oct 10 17:30:43 grisu cardmgr[378]: watching 1 socket
    Oct 10 17:30:43 grisu cardmgr[379]: starting, version is 3.2.5
    Oct 10 17:30:59 grisu cardmgr[379]: socket 0: Ninja ATA
    Oct 10 17:30:59 grisu kernel: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xdc000-0xdffff 0xe8000-0xfffff
    Oct 10 17:30:59 grisu cardmgr[379]: executing: 'modprobe ide-cs'
    Oct 10 17:31:18 grisu kernel: hdc: TOSHIBA CD-ROM XM-7002Bc, ATAPI CD/DVD-ROM drive
    Oct 10 17:31:18 grisu kernel: hdc: IRQ probe failed (0xb4f8)
    Oct 10 17:31:18 grisu kernel: hdd: IRQ probe failed (0xb4f8)
    Oct 10 17:31:18 grisu kernel: hdd: IRQ probe failed (0xb4f8)
    Oct 10 17:31:18 grisu kernel: hdd: no response (status = 0x0a), resetting drive
    Oct 10 17:31:18 grisu kernel: hdd: IRQ probe failed (0xb4f8)
    Oct 10 17:31:18 grisu kernel: hdd: no response (status = 0x0a)
    Oct 10 17:31:18 grisu kernel: ide1: DISABLED, NO IRQ
    Oct 10 17:31:20 grisu kernel: ide1: ports already in use, skipping probe
    Oct 10 17:31:36 grisu last message repeated 8 times
    Oct 10 17:31:37 grisu kernel: ide_cs: ide_register() at 0x180 & 0x386, irq 0 failed
    Oct 10 17:31:38 grisu cardmgr[379]: get dev info on socket 0 failed: Resource temporarily unavailable
    Oct 10 17:31:41 grisu cardmgr[379]: executing: 'modprobe -r ide-cs'
    \
     
     \ /
      Last update: 2005-03-22 13:49    [W:0.048 / U:61.448 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site