lkml.org 
[lkml]   [2003]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: 2.5.54 problem with IDE ICH4 and aic7xxx
    On Sun, Jan 05, 2003 at 10:35:47AM -0700, Justin T. Gibbs wrote:

    > Does the problem persist if you disable domain
    > validation via SCSI-Select on your 29160?

    Well, I put in http://ulima.unil.ch/greg/linux/2.5.54/dmesg-2.5.54-2
    the new result: it's really worse:

    aic7xxx: PCI Device 3:3:0 failed memory mapped test. Using PIO.
    scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.25
    <Adaptec 29160B Ultra160 SCSI adapter>
    aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs

    (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
    (scsi1:A:1:0): refuses WIDE negotiation. Using 8bit transfers
    (scsi1:A:1): 10.000MB/s transfers (10.000MHz, offset 15)
    (scsi1:A:2): 10.000MB/s transfers (10.000MHz, offset 8)
    (scsi1:A:3): 10.000MB/s transfers (10.000MHz, offset 8)
    (scsi0:A:15): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit)
    Vendor: IBM Model: DDRS-39130D Rev: DC1B
    Type: Direct-Access ANSI SCSI revision: 02
    scsi0:A:0:0: Tagged Queuing enabled. Depth 253
    Vendor: SEAGATE Model: ST336706LW Rev: 0108
    Type: Direct-Access ANSI SCSI revision: 03
    scsi0:A:15:0: Tagged Queuing enabled. Depth 253
    scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.25
    <Adaptec 2940 Ultra SCSI adapter>
    aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs

    scsi1:A:10:0: DV failed to configure device. Please file a bug report against this
    driver.
    Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R04
    Type: CD-ROM ANSI SCSI revision: 02
    Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
    Type: CD-ROM ANSI SCSI revision: 02
    Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
    Type: CD-ROM ANSI SCSI revision: 02
    SCSI device sda: drive cache: write through
    SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
    /dev/scsi/host0/bus0/target0/lun0: p1 p2
    Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    SCSI device sdb: drive cache: write back
    SCSI device sdb: 71687370 512-byte hdwr sectors (36704 MB)
    /dev/scsi/host0/bus0/target15/lun0: p1 p2
    Attached scsi disk sdb at scsi0, channel 0, id 15, lun 0
    sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
    Attached scsi CD-ROM sr0 at scsi1, channel 0, id 1, lun 0
    sr1: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
    Attached scsi CD-ROM sr1 at scsi1, channel 0, id 2, lun 0
    sr2: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
    Attached scsi CD-ROM sr2 at scsi1, channel 0, id 3, lun 0
    device class 'input': registering
    register interface 'mouse' with class 'input'

    I still have the :

    aic7xxx: PCI Device 3:3:0 failed memory mapped test. Using PIO.

    But now I have the:

    scsi1:A:10:0: DV failed to configure device. Please file a bug report against this driver.

    But I don't know what that mean...

    cat /proc/scsi/scsi gives me:

    Attached devices:
    Host: scsi0 Channel: 00 Id: 00 Lun: 00
    Vendor: IBM Model: DDRS-39130D Rev: DC1B
    Type: Direct-Access ANSI SCSI revision: 02
    Host: scsi0 Channel: 00 Id: 15 Lun: 00
    Vendor: SEAGATE Model: ST336706LW Rev: 0108
    Type: Direct-Access ANSI SCSI revision: 03
    Host: scsi1 Channel: 00 Id: 01 Lun: 00
    Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R04
    Type: CD-ROM ANSI SCSI revision: 02
    Host: scsi1 Channel: 00 Id: 02 Lun: 00
    Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
    Type: CD-ROM ANSI SCSI revision: 02
    Host: scsi1 Channel: 00 Id: 03 Lun: 00
    Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.08
    Type: CD-ROM ANSI SCSI revision: 02

    Thank you very much,

    Grégoire
    ________________________________________________________________
    http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:32    [W:0.027 / U:32.800 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site