lkml.org 
[lkml]   [2003]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Update PnP IDE (2/6)


"ide_unregister" is only called if you are physically removing the
controller. If PNP is going to permit physical removal when the OS is
HOT, it may be justified. This can make a "hole" in the rest of the
driver an generate an OOPS. IDE-CS has alway insured the ordering was
last.

I need to thinks some more about it first.

Cheers,


On Sat, 25 Jan 2003, Adam Belay wrote:

> This patch converts the ide driver to the latest pnp changes. I do not have this
> hardware so this patch was only tested for compilation.
>
> Please note: I added ide_unregister to ide.h becuase I needed it for the driver
> conversion. Please let me know if this is not the proper unregister api for ide
> devices.
>
> -Adam
>
>
> diff -ur a/drivers/ide/Kconfig b/drivers/ide/Kconfig
> --- a/drivers/ide/Kconfig Tue Jan 14 05:58:40 2003
> +++ b/drivers/ide/Kconfig Thu Jan 16 13:32:21 2003
> @@ -232,14 +232,13 @@
> and your BIOS does not already do this for you, then say Y here.
> Otherwise say N.
>
> -config BLK_DEV_ISAPNP
> - bool "ISA-PNP EIDE support"
> - depends on BLK_DEV_IDE && ISAPNP
> +config BLK_DEV_IDEPNP
> + bool "PNP EIDE support"
> + depends on BLK_DEV_IDE && PNP
> help
> - If you have an ISA EIDE card that is PnP (Plug and Play) and
> - requires setup first before scanning for devices, say Y here.
> -
> - If unsure, say N.
> + If you have a PnP (Plug and Play) compatible EIDE card and
> + would like the kernel to automatically detect and activate
> + it, say Y here.
>
> config BLK_DEV_IDEPCI
> bool "PCI IDE chipset support" if PCI
> diff -ur a/drivers/ide/Makefile b/drivers/ide/Makefile
> --- a/drivers/ide/Makefile Tue Jan 14 05:58:42 2003
> +++ b/drivers/ide/Makefile Thu Jan 16 13:31:55 2003
> @@ -23,7 +23,7 @@
> obj-$(CONFIG_BLK_DEV_IDEPCI) += setup-pci.o
> obj-$(CONFIG_BLK_DEV_IDEDMA_PCI) += ide-dma.o
> obj-$(CONFIG_BLK_DEV_IDE_TCQ) += ide-tcq.o
> -obj-$(CONFIG_BLK_DEV_ISAPNP) += ide-pnp.o
> +obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
>
> ifeq ($(CONFIG_BLK_DEV_IDE),y)
> obj-$(CONFIG_PROC_FS) += ide-proc.o
> diff -ur a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
> --- a/drivers/ide/ide-pnp.c Tue Jan 14 05:58:59 2003
> +++ b/drivers/ide/ide-pnp.c Thu Jan 16 15:32:36 2003
> @@ -19,9 +19,7 @@
> #include <linux/ide.h>
> #include <linux/init.h>
>
> -#include <linux/isapnp.h>
> -
> -#define DEV_NAME(dev) (dev->name)
> +#include <linux/pnp.h>
>
> #define GENERIC_HD_DATA 0
> #define GENERIC_HD_ERROR 1
> @@ -32,31 +30,27 @@
> #define GENERIC_HD_SELECT 6
> #define GENERIC_HD_STATUS 7
>
> -static int generic_ide_offsets[IDE_NR_PORTS] __initdata = {
> +static int generic_ide_offsets[IDE_NR_PORTS] = {
> GENERIC_HD_DATA, GENERIC_HD_ERROR, GENERIC_HD_NSECTOR,
> GENERIC_HD_SECTOR, GENERIC_HD_LCYL, GENERIC_HD_HCYL,
> GENERIC_HD_SELECT, GENERIC_HD_STATUS, -1, -1
> };
>
> -/* ISA PnP device table entry */
> -struct pnp_dev_t {
> - unsigned short card_vendor, card_device, vendor, device;
> - int (*init_fn)(struct pnp_dev *dev, int enable);
> +/* Add your devices here :)) */
> +struct pnp_device_id idepnp_devices[] = {
> + /* Generic ESDI/IDE/ATA compatible hard disk controller */
> + {.id = "PNP0600", .driver_data = 0},
> + {.id = ""}
> };
>
> -/* Generic initialisation function for ISA PnP IDE interface */
> -
> -static int __init pnpide_generic_init(struct pnp_dev *dev, int enable)
> +static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id)
> {
> hw_regs_t hw;
> ide_hwif_t *hwif;
> int index;
>
> - if (!enable)
> - return 0;
> -
> if (!(pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && pnp_irq_valid(dev, 0)))
> - return 1;
> + return -1;
>
> ide_setup_ports(&hw, (ide_ioreg_t) pnp_port_start(dev, 0),
> generic_ide_offsets,
> @@ -68,82 +62,36 @@
> index = ide_register_hw(&hw, &hwif);
>
> if (index != -1) {
> - printk(KERN_INFO "ide%d: %s IDE interface\n", index, DEV_NAME(dev));
> + printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index);
> + pnp_set_drvdata(dev,hwif);
> hwif->pnp_dev = dev;
> return 0;
> }
>
> - return 1;
> + return -1;
> }
>
> -/* Add your devices here :)) */
> -struct pnp_dev_t idepnp_devices[] __initdata = {
> - /* Generic ESDI/IDE/ATA compatible hard disk controller */
> - { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
> - ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x0600),
> - pnpide_generic_init },
> - { 0 }
> -};
> +static void idepnp_remove(struct pnp_dev * dev)
> +{
> + ide_hwif_t *hwif = pnp_get_drvdata(dev);
> + if (hwif) {
> + ide_unregister(hwif->index);
> + } else
> + printk(KERN_ERR "idepnp: Unable to remove device, please report.\n");
> +}
>
> -#define NR_PNP_DEVICES 8
> -struct pnp_dev_inst {
> - struct pnp_dev *dev;
> - struct pnp_dev_t *dev_type;
> +static struct pnp_driver idepnp_driver = {
> + .name = "ide",
> + .id_table = idepnp_devices,
> + .probe = idepnp_probe,
> + .remove = idepnp_remove,
> };
> -static struct pnp_dev_inst devices[NR_PNP_DEVICES];
> -static int pnp_ide_dev_idx = 0;
>
> -/*
> - * Probe for ISA PnP IDE interfaces.
> - */
>
> -void __init pnpide_init(int enable)
> +void pnpide_init(int enable)
> {
> - struct pnp_dev *dev = NULL;
> - struct pnp_dev_t *dev_type;
> -
> - if (!isapnp_present())
> - return;
> -
> - /* Module unload, deactivate all registered devices. */
> - if (!enable) {
> - int i;
> - for (i = 0; i < pnp_ide_dev_idx; i++) {
> - dev = devices[i].dev;
> - devices[i].dev_type->init_fn(dev, 0);
> - pnp_device_detach(dev);
> - }
> - return;
> - }
> -
> - for (dev_type = idepnp_devices; dev_type->vendor; dev_type++) {
> - while ((dev = pnp_find_dev(NULL, dev_type->vendor,
> - dev_type->device, dev))) {
> -
> - if (pnp_device_attach(dev) < 0)
> - continue;
> -
> - if (pnp_activate_dev(dev, NULL) < 0) {
> - printk(KERN_ERR"ide: %s activate failed\n", DEV_NAME(dev));
> - continue;
> - }
> -
> - /* Call device initialization function */
> - if (dev_type->init_fn(dev, 1)) {
> - pnp_device_detach(dev);
> - } else {
> -#ifdef MODULE
> - /*
> - * Register device in the array to
> - * deactivate it on a module unload.
> - */
> - if (pnp_ide_dev_idx >= NR_PNP_DEVICES)
> - return;
> - devices[pnp_ide_dev_idx].dev = dev;
> - devices[pnp_ide_dev_idx].dev_type = dev_type;
> - pnp_ide_dev_idx++;
> -#endif
> - }
> - }
> - }
> + if(enable)
> + pnp_register_driver(&idepnp_driver);
> + else
> + pnp_unregister_driver(&idepnp_driver);
> }
> diff -ur a/drivers/ide/ide.c b/drivers/ide/ide.c
> --- a/drivers/ide/ide.c Tue Jan 14 05:58:26 2003
> +++ b/drivers/ide/ide.c Thu Jan 16 15:08:55 2003
> @@ -817,6 +817,7 @@
>
> EXPORT_SYMBOL(ide_unregister);
>
> +
> /**
> * ide_setup_ports - set up IDE interface ports
> * @hw: register descriptions
> @@ -2071,12 +2072,12 @@
> buddha_init();
> }
> #endif /* CONFIG_BLK_DEV_BUDDHA */
> -#if defined(CONFIG_BLK_DEV_ISAPNP) && defined(CONFIG_ISAPNP)
> +#if defined(CONFIG_BLK_DEV_IDEPNP) && defined(CONFIG_PNP)
> {
> extern void pnpide_init(int enable);
> pnpide_init(1);
> }
> -#endif /* CONFIG_BLK_DEV_ISAPNP */
> +#endif /* CONFIG_BLK_DEV_IDEPNP */
> }
>
> void __init ide_init_builtin_drivers (void)
> @@ -2247,9 +2248,9 @@
> spin_unlock_irqrestore(&ide_lock, flags);
> return 1;
> }
> -#if defined(CONFIG_BLK_DEV_ISAPNP) && defined(CONFIG_ISAPNP) && defined(MODULE)
> +#if defined(CONFIG_BLK_DEV_IDEPNP) && defined(CONFIG_PNP) && defined(MODULE)
> pnpide_init(0);
> -#endif /* CONFIG_BLK_DEV_ISAPNP */
> +#endif /* CONFIG_BLK_DEV_IDEPNP */
> #ifdef CONFIG_PROC_FS
> ide_remove_proc_entries(drive->proc, DRIVER(drive)->proc);
> ide_remove_proc_entries(drive->proc, generic_subdriver_entries);
> diff -ur a/include/linux/ide.h b/include/linux/ide.h
> --- a/include/linux/ide.h Tue Jan 14 05:58:33 2003
> +++ b/include/linux/ide.h Thu Jan 16 15:32:03 2003
> @@ -1721,6 +1721,7 @@
> #endif
>
> extern void hwif_unregister(ide_hwif_t *);
> +extern void ide_unregister (unsigned int index);
>
> extern void export_ide_init_queue(ide_drive_t *);
> extern u8 export_probe_for_drive(ide_drive_t *);
>

Andre Hedrick
LAD Storage Consulting Group

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:32    [W:1.338 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site