lkml.org 
[lkml]   [2003]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] Re: [BUG] cardbus/hotplugging still broken in 2.5.56
From
You are not freeing the possibly already allocated resources in case of
a failure of either pci_assign_resource() or pca_enable_device(). In
fact you are not even checking if pci_assign_resource() fails. That
seems wrong to me.

Btw.: who is in charge of this file? Dave Jones? Is someone working on
integrating it with PCI Hotplug?

Best Regards
Jens


On Wed, Jan 15, 2003 at 06:26:36PM +0200, Yaacov Akiba Slama wrote:
> Can you test the enclosed patch. It seems to be both simple and to
> resolve the resource collisions and the "No IRQ known" problem.
> I added a smal comment (and modified another) so future janitors won't
> move pci_enable above pci_assign_resource again.
> If everyone is ok, I can send it to Linus for inclusion in BK (I have
> the green light of Dave Jones).
>
> Thanks,
> Yaacov Akiba Slama
>
> Mikael Pettersson wrote:
>
> >Jens Taprogge writes:
> >> The cardbus problems are caused by
> >>
> >> ChangeSet@1.797.145.6 2002-11-25 18:31:10-08:00 davej@codemonkey.org.uk
> >>
> >> as far as I can tell.
> >>
> >> pci_enable_device() will fail at least on i386 (see
> >> arch/i386/pci/i386.c: pcibios_enable_resource (line 260)) if the
> >> resources have not been assigned previously. Hence the ostensible
> >> resource collisions.
> >>
> >> The attached patch should fix the problem.
> >>
> >> I have send the patch to Dave Jones some time ago but did not hear from
> >> him yet.
> >>
> >> I am not subscribed to the list so please cc me on replys.
> >
> >Thanks. Your patch fixed the cardbus hotplug issue perfectly on my laptop.
> >It survives multiple insert/eject cycles without any problems.
> >
> >The patch posted by Yaacov Akiba Slama today also fixed cardbus hotplug
> >for me, but with his patch the kernel still prints "PCI: No IRQ known for
> >interrupt pin A of device xx:xx.x. Please try using pci=biosirq" when the
> >cardbus NIC is inserted; Jens Taprogge's patch silenced that warning.
> >
> >/Mikael
> >
> >
> >

> --- drivers/pcmcia/cardbus.c.original 2003-01-14 19:38:49.000000000 +0200
> +++ drivers/pcmcia/cardbus.c 2003-01-15 18:21:40.000000000 +0200
> @@ -285,25 +285,29 @@
> dev->dev.dma_mask = &dev->dma_mask;
>
> pci_setup_device(dev);
> - if (pci_enable_device(dev))
> - continue;
>
> strcpy(dev->dev.bus_id, dev->slot_name);
>
> - /* FIXME: Do we need to enable the expansion ROM? */
> + /* We need to assign resources for expansion ROM. */
> for (r = 0; r < 7; r++) {
> struct resource *res = dev->resource + r;
> - if (res->flags)
> + if (!res->start && res->end)
> pci_assign_resource(dev, r);
> }
>
> /* Does this function have an interrupt at all? */
> pci_readb(dev, PCI_INTERRUPT_PIN, &irq_pin);
> - if (irq_pin) {
> + if (irq_pin)
> dev->irq = irq;
> - pci_writeb(dev, PCI_INTERRUPT_LINE, irq);
> - }
> +
> + /* pci_enable_device needs to be called after pci_assign_resource */
> + /* because it returns an error if (!res->start && res->end). */
> + if (pci_enable_device(dev))
> + continue;
>
> + if (irq_pin)
> + pci_writeb(dev, PCI_INTERRUPT_LINE, irq);
> +
> device_register(&dev->dev);
> pci_insert_device(dev, bus);
> }


--
Jens Taprogge

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:32    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site