lkml.org 
[lkml]   [2003]   [Jan]   [10]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateThu, 9 Jan 2003 23:14:50 -0600
FromJames Curbo <>
SubjectRe: DMA timeouts on Promise 20267 IDE card
On Jan 09, Manish Lachwani wrote:
> Can you also get the SMART data from the drives using smartctl? Also, it
> looks like the errors are happening on both the drives. Which UDMA mode are
> you operating in?
> 
> Thanks
> Manish

UDMA 5 for both of them. Here is the smartctl data:

carthage:/home/james# smartctl -v /dev/hda
Vendor Specific SMART Attributes with Thresholds:
Revision Number: 16
Attribute                    Flag     Value Worst Threshold Raw Value
(  1)Raw Read Error Rate     0x000b   200   199   051       0
(  3)Spin Up Time            0x0007   102   095   021       3733
(  4)Start Stop Count        0x0032   100   100   040       419
(  5)Reallocated Sector Ct   0x0032   160   160   112       160
(  7)Seek Error Rate         0x000b   100   253   051       0
(  9)Power On Hours          0x0032   079   079   000       15858
( 10)Spin Retry Count        0x0013   100   099   051       2
( 11)Calibration Retry Count 0x0013   100   100   051       0
( 12)Power Cycle Count       0x0032   100   100   000       358
(196)Reallocated Event Count 0x0032   126   126   000       74
(197)Current Pending Sector  0x0012   200   200   000       1
(198)Offline Uncorrectable   0x0012   200   200   000       0
(199)UDMA CRC Error Count    0x000a   200   253   000       65884
(200)Unknown Attribute       0x0009   200   199   051       1

carthage:/home/james# smartctl -v /dev/hdc
Vendor Specific SMART Attributes with Thresholds:
Revision Number: 16
Attribute                    Flag     Value Worst Threshold Raw Value
(  1)Raw Read Error Rate     0x000b   200   200   051       0
(  3)Spin Up Time            0x0007   101   093   021       2300
(  4)Start Stop Count        0x0032   100   100   040       96
(  5)Reallocated Sector Ct   0x0033   200   200   140       0
(  7)Seek Error Rate         0x000b   200   200   051       0
(  9)Power On Hours          0x0032   096   096   000       3325
( 10)Spin Retry Count        0x0013   100   253   051       0
( 11)Calibration Retry Count 0x0013   100   253   051       0
( 12)Power Cycle Count       0x0032   100   100   000       93
(196)Reallocated Event Count 0x0032   200   200   000       0
(197)Current Pending Sector  0x0012   200   200   000       0
(198)Offline Uncorrectable   0x0012   200   200   000       0
(199)UDMA CRC Error Count    0x000a   200   253   000       0
(200)Unknown Attribute       0x0009   200   200   051       0



-- 
James Curbo <hannibal@adtrw.org> <phoenix@sandwich.net>
http://www.adtrw.org/blogs/hannibal/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:32    [from the cache]
©2003-2008