Messages in this thread | | | Date | Mon, 30 Sep 2002 15:51:30 +0200 | From | Jens Axboe <> | Subject | Re: 2.5.37 oopses at boot in ide_toggle_bounce |
| |
On Mon, Sep 30 2002, Andries Brouwer wrote: > On Mon, Sep 23, 2002 at 12:04:24PM +0200, Jens Axboe wrote: > > > On Mon, Sep 23 2002, Andries Brouwer wrote: > > > > > It no longer sees my disks on an HPT366, > > > > Can you send me the kernel boot log > > > > Ah hang on, please boot with this patch from Ivan. > > Patch makes no difference. > > Situation: > no special kernel boot parameters concerning these disks, > no hdparm used > no CONFIG_BLK_DEV_HPT366 > > For 2.5.33: > > HPT366: IDE controller on PCI bus 00 dev 48 > HPT366: detected chipset, but driver not compiled in! > HPT366: chipset revision 1 > HPT366: not 100%% native mode: will probe irqs later > ide2: BM-DMA at 0x9c00-0x9c07, BIOS settings: hde:pio, hdf:pio > HPT366: IDE controller on PCI bus 00 dev 49 > HPT366: chipset revision 1 > HPT366: not 100%% native mode: will probe irqs later > ide3: BM-DMA at 0xa800-0xa807, BIOS settings: hdg:pio, hdh:pio > > For 2.5.38: > The string HPT does not occur in the boot log. > > For 2.5.38 with CONFIG_BLK_DEV_HPT366: > all OK at first sight, the disks mount, have not tried to stress them > warnings in boot.log: > > HPT366: chipset revision 1 > HPT366: not 100%% native mode: will probe irqs later > ide2: BM-DMA at 0x9c00-0x9c07, BIOS settings: hde:DMA, hdf:DMA > hde: Maxtor 93652U8, ATA DISK drive > hdf: Maxtor 96147H6, ATA DISK drive > hde: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } > hde: set_drive_speed_status: error=0x04 { DriveStatusError } > hdf: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } > hdf: set_drive_speed_status: error=0x04 { DriveStatusError } > > Funny that 2.5.33 reports "BIOS settings: hde:pio, hdf:pio" > while 2.5.38 says "BIOS settings: hde:DMA, hdf:DMA". > > Long ago I would get (sporadic) disk errors and fs corruption with > CONFIG_BLK_DEV_HPT366, while all worked without. Today > CONFIG_BLK_DEV_HPT366 is required, but apart from the messages quoted > I have not seen any error messages or problems. Everything works. > > Precisely the same holds for 2.5.39.
Does it work in 2.4.20-pre-ac?
-- Jens Axboe
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |