Messages in this thread | | | From | "Feldman, Scott" <> | Subject | RE: eepro100/e100 drivers fragment heavily | Date | Mon, 23 Sep 2002 13:03:58 -0700 |
| |
Todor Todorov wrote:
> The computer is a > Dell Inspiron 8000 laptop with an internal Actiontec > modem/nic combo pci card based on the Intel Pro chip, running > Debian. I observed this behaviour with the eepro100 drivers > in 2.4.19, 2.4.20-pre6 and 2.4.20-pre7 and e100 drivers in > 2.4.20-pre6 and -pre7. Pulling data from the network is fine > and fast though, only sending is a problem. The only hint I > have of what migh be causing the problem is something I read > in the specs of my NWAY SOHO switch - it would allow > full-duplex 100 MBit/sec only based on auto negotiation, if a > nic is in forced mode (say 100 MBit full-duplex), the swith > will allow only 100 MBit half-duplex. I tried other high > quality switches too, but the result was the same.
Please confirm that the switch and nic are both set to auto-neg, or both the switch and the nic forced to the same settings (i.e. 100/half). We need to make sure both ends of the wire match.
-scott - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |