Messages in this thread | | | From | Ed Tomlinson <> | Subject | Re: 34-bk current ide problems - unexpected interrupt | Date | Fri, 13 Sep 2002 22:58:21 -0400 |
| |
On September 13, 2002 09:42 pm, Ed Tomlinson wrote: > Hi, > > To check if the problem I am seeing is with the port to 2.5 I tried > 2.4.20-pre5-ac4 and 2.4.20-pre5-ac6. Both booted correctly. > > Now to try 2.5.34+bk without Andrew's mm patch. If that fails what > debugging info would help solve the unexpected interrupt problem?
to summerize
2.4.20-pre5-ac4 works 2.4.20-pre5-ac5 works 2.5.34-mm1 works (without Jens ide port of pre5-ac4) 2.5.34-mm2 fails with unexpected interrupt loop 2.5.34-bk current fails with unexpected interrupt loop
Removing the printk from ide.c does _not_ cure the problem. The ide setting between 2.4 and 2.5 were as identical as I can make them.
A failing 2.5 boot gives:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes VP_IDE: IDE controller at PCI slot 00:07.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1 ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive hda: DMA disabled ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: CD-ROM 50X, ATAPI CD/DVD-ROM drive hdd: HP COLORADO 20GB, ATAPI TAPE drive hdc: DMA disabled hdd: DMA disabled ide1 at 0x170-0x177,0x376 on irq 15 PDC20267: IDE controller at PCI slot 00:09.0 PCI: Found IRQ 12 for device 00:09.0 PDC20267: chipset revision 2 PDC20267: not 100% native mode: will probe irqs later PDC20267: ROM enabled at 0xeb000000 PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:pio hde: QUANTUM FIREBALLP AS40.0, ATA DISK drive ide2 at 0xac00-0xac07,0xb002 on irq 12 ide_intr: unexpected interrupt! ide_intr: unexpected interrupt! ide_intr: unexpected interrupt! ....
A working 2.4-pre5-ac4 boot gives: Sep 13 21:17:50 oscar kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 Sep 13 21:17:50 oscar kernel: ide: Assuming 33MHz system bus speed for PIO modes Sep 13 21:17:50 oscar kernel: VP_IDE: IDE controller at PCI slot 00:07.1 Sep 13 21:17:50 oscar kernel: VP_IDE: chipset revision 6 Sep 13 21:17:50 oscar kernel: VP_IDE: not 100%% native mode: will probe irqs later Sep 13 21:17:50 oscar kernel: VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1 Sep 13 21:17:50 oscar kernel: ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA Sep 13 21:17:50 oscar kernel: ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA Sep 13 21:17:50 oscar kernel: PDC20267: IDE controller at PCI slot 00:09.0 Sep 13 21:17:50 oscar kernel: PCI: Found IRQ 12 for device 00:09.0 Sep 13 21:17:50 oscar kernel: PDC20267: chipset revision 2 Sep 13 21:17:50 oscar kernel: PDC20267: not 100%% native mode: will probe irqs later Sep 13 21:17:50 oscar kernel: PDC20267: ROM enabled at 0xeb000000 Sep 13 21:17:50 oscar kernel: PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode. Sep 13 21:17:50 oscar kernel: ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:DMA, hdf:pio Sep 13 21:17:50 oscar kernel: ide3: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdg:DMA, hdh:pio Sep 13 21:17:50 oscar kernel: hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive Sep 13 21:17:50 oscar kernel: hda: DMA disabled Sep 13 21:17:50 oscar kernel: blk: queue c02a83c0, I/O limit 4095Mb (mask 0xffffffff) Sep 13 21:17:50 oscar kernel: hdc: CD-ROM 50X, ATAPI CD/DVD-ROM drive Sep 13 21:17:50 oscar kernel: hdd: HP COLORADO 20GB, ATAPI TAPE drive Sep 13 21:17:50 oscar kernel: hdc: DMA disabled Sep 13 21:17:50 oscar kernel: hdd: DMA disabled Sep 13 21:17:50 oscar kernel: hde: QUANTUM FIREBALLP AS40.0, ATA DISK drive Sep 13 21:17:50 oscar kernel: blk: queue c02a8ca8, I/O limit 4095Mb (mask 0xffffffff) Sep 13 21:17:50 oscar kernel: hdg: QUANTUM FIREBALLP AS40.0, ATA DISK drive
Notice that 2.4 orders the boot differently. Wonder if this is significant?
What additional info would help?
Ed Tomlinson
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |