lkml.org 
[lkml]   [2002]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subjectsym53c875J frequent bus resets
Date
I've been running the 2.4 kernel for about a year on several
computers. On this one computer the scsi bus resets at an
alarming frequency. More so if the bus is being used. This
never happened with the 2.2 kernel so I keep wondering if I need
a new configuration parameter for the driver. The device that
seems to be causing the reset is a basic NEC SCSI cd-rom drive.
The drive works fine: reads any disk I put in it.

Thanks for any help!

--Rob


From "/var/log/messages":

Sep 11 10:13:43 pulsar kernel: scsi : aborting command due to
timeout : pid 428547, scsi0, channel 0, id 4, lun 0 Read TOC 00
00 00 00 00 00 00 0c 00
Sep 11 10:13:43 pulsar kernel: sym53c8xx_abort: pid=428547
serial_number=428547 serial_number_at_timeout=428547
Sep 11 10:13:46 pulsar kernel: SCSI host 0 abort (pid 428547)
timed out - resetting
Sep 11 10:13:46 pulsar kernel: SCSI bus is being reset for host 0
channel 0.
Sep 11 10:13:46 pulsar kernel: sym53c8xx_reset: pid=428547
reset_flags=2 serial_number=428547
serial_number_at_timeout=428547
Sep 11 10:13:46 pulsar kernel: sym53c875J-0: restart (scsi
reset).
Sep 11 10:13:46 pulsar kernel: sym53c875J-0: Downloading SCSI
SCRIPTS.
Sep 11 10:13:46 pulsar kernel: sym53c875J-0-<4,*>: FAST-10 SCSI
8.0 MB/s (125.0 ns, offset 15)
Sep 11 10:13:46 pulsar kernel: sym53c875J-0-<0,*>: FAST-10 WIDE
SCSI 20.0 MB/s (100.0 ns, offset 15)

From "/proc/scsi/scsi":

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: NEC Model: CD-ROM DRIVE:461 Rev: 2.3d
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: HP Model: C1130A Rev: 3540
Type: Processor ANSI SCSI revision: 02

From "/proc/scsi/sym53c8xx/0":

General information:
Chip sym53c875J, device id 0x8f, revision id 0x4
On PCI bus 0, device 11, function 0, IRQ 9
Synchronous period factor 12, max commands per lun 32

From "/var/log/dmesg":

SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno
= 2
PCI: Found IRQ 9 for device 00:0b.0
sym53c8xx: at PCI bus 0, device 11, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875J detected with Symbios NVRAM
sym53c875J-0: rev 0x4 on pci bus 0 device 11 function 0 irq 9
sym53c875J-0: Symbios format NVRAM, ID 7, Fast-20, Parity
Checking
sym53c875J-0: on-chip RAM at 0xef000000
sym53c875J-0: restart (scsi reset).
sym53c875J-0: Downloading SCSI SCRIPTS.
scsi0 : sym53c8xx-1.7.3c-20010512
blk: queue c7f54618, I/O limit 4095Mb (mask 0xffffffff)
Vendor: SEAGATE Model: ST15230W SUN4.2G Rev: 0738
Type: Direct-Access ANSI SCSI revision:
02
blk: queue c7f54818, I/O limit 4095Mb (mask 0xffffffff)
Vendor: NEC Model: CD-ROM DRIVE:461 Rev: 2.3d
Type: CD-ROM ANSI SCSI revision:
02
blk: queue c7b55018, I/O limit 4095Mb (mask 0xffffffff)
Vendor: HP Model: C1130A Rev: 3540
Type: Processor ANSI SCSI revision:
02
blk: queue c7b55218, I/O limit 4095Mb (mask 0xffffffff)
sym53c875J-0-<0,0>: tagged command queue depth set to 8
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
sym53c875J-0-<0,*>: FAST-10 WIDE SCSI 20.0 MB/s (100.0 ns, offset
15)
SCSI device sda: 8386733 512-byte hdwr sectors (4294 MB)
Partition check:
sda: sda1 sda2 sda3
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:22    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site