lkml.org 
[lkml]   [2002]   [Aug]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
Subject2.4.19 hangs on partition table check
From
Hi,

during boot the kernel hangs when it tries to check the partition table
of one hd, a 120GB Maxtor. The gemometry is detected right though and
there are no problems with the 2.4.18 kernel where i used the same
configuration as with the new kernel.

the host is a i586 on a gigabyte HX motherboard and i am running debian
testing with the latest packages.

this drive (hdg) is atached to a promise66 pci card on the second controler
(ide3) and is the only drive there. i have two other maxtors (60GB and
80GB) atached to the other controler (ide2). the partition table checks
for those work fine.

if you need any other information, please let me know.

by
bd

$ cat /usr/src/linux/.config | grep PDC
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_PDC202XX_BURST=y
# CONFIG_PDC202XX_FORCE is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set

$ cat /proc/pci
Bus 0, device 8, function 0:
Unknown mass storage controller: Promise Technology, Inc. 20262 (rev 1).
IRQ 11.
Master Capable. Latency=32.
I/O at 0x6000 [0x6007].
I/O at 0x6100 [0x6103].
I/O at 0x6200 [0x6207].
I/O at 0x6300 [0x6303].
I/O at 0x6400 [0x643f].
Non-prefetchable 32 bit memory at 0xe0000000 [0xe001ffff].

$ cat /proc/ide/pdc2002xx
PDC20262 Chipset.
------------------------------- General Status ---------------------------------
Burst Mode : enabled
Host Mode : Normal
Bus Clocking : 33 PCI Internal
IO pad select : 4 mA
Status Polling Period : 0
Interrupt Check Status Polling Delay : 2
--------------- Primary Channel ---------------- Secondary Channel -------------
enabled enabled
66 Clocking enabled enabled
Mode PCI Mode PCI
FIFO Empty FIFO Empty
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------
DMA enabled: yes yes yes no
DMA Mode: UDMA 4 UDMA 4 UDMA 4 NOTSET
PIO Mode: PIO 4 PIO 4 PIO 4 NOTSET

$ cat /proc/ide/ide3/hdg/geometry
physical 238216/16/63
logical 238216/16/63

$ cat /proc/ide/ide3/hdg/model
Maxtor 4G120J6

$ /sbin/fdisk -l /dev/hdg
Disk /dev/hdg: 16 heads, 63 sectors, 238216 cylinders
Units = cylinders of 1008 * 512 bytes

Device Boot Start End Blocks Id System
/dev/hdg1 1 41611 20971912+ 83 Linux
/dev/hdg2 41612 83222 20971944 83 Linux
/dev/hdg3 83223 124833 20971944 83 Linux
/dev/hdg4 124834 238216 57145032 5 Extended
/dev/hdg5 124834 166444 20971912+ 83 Linux
/dev/hdg6 166445 208055 20971912+ 83 Linux
/dev/hdg7 208056 238216 15201112+ 83 Linux

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:27    [W:0.036 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site