lkml.org 
[lkml]   [2002]   [Aug]   [29]   [last100]   RSS Feed
Views: [more markup]   [less markup]   [headers]   [forward]  
 
Messages in this thread
/
DateThu, 29 Aug 2002 20:04:58 -0700 (PDT)
FromAndre Hedrick <>
SubjectRe: Hangs in 2.4.19 and 2.4.20-pre5 (IDE-related?)
Good cause then I take responsiblity for it.

On Thu, 29 Aug 2002, Vojtech Pavlik wrote:

> On Thu, Aug 29, 2002 at 12:37:19PM -0700, Andre Hedrick wrote:
> 
> > On Thu, 29 Aug 2002, Meelis Roos wrote:
> > 
> > > pcibus = 33333
> > > 00:07.1 vendor=8086 device=7111 class=0101 irq=0 base4=f001
> > > ----------PIIX BusMastering IDE Configuration---------------
> > > Driver Version:                     1.3
> > > South Bridge:                       28945
> > > Revision:                           IDE 0x1
> > > Highest DMA rate:                   UDMA33
> > > BM-DMA base:                        0xf000
> > > PCI clock:                          33.3MHz
> > > -----------------------Primary IDE-------Secondary IDE------
> > > Enabled:                      yes                 yes
> > > Simplex only:                  no                  no
> > > Cable Type:                   40w                 40w
> > > -------------------drive0----drive1----drive2----drive3-----
> > > Prefetch+Post:        yes       yes       yes       yes
> > > Transfer Mode:        PIO       PIO       PIO       PIO
> > > Address Setup:       90ns      90ns      90ns      90ns
> > > Cmd Active:         360ns     360ns     360ns     360ns
> > > Cmd Recovery:       540ns     540ns     540ns     540ns
> > > Data Active:         90ns      90ns      90ns      90ns
> > > Data Recovery:       30ns      30ns      90ns      30ns
> > > Cycle Time:         120ns     120ns     180ns     120ns
> > > Transfer Rate:   16.6MB/s  16.6MB/s  11.1MB/s  16.6MB/s
> > 
> > That is not my work and you are on your own for that mess.
> > That looks straight out of 2.5.30.
> 
> Don't be so quick with shooing people away - this is the output of the
> 'atapci' userspace program. It only reads the PCI config registers and

Well if atapci is that complete then I see no reason to keep proc about.
So if it needs to go we delete it.

Regards,

Andre Hedrick
LAD Storage Consulting Group

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 11:28    [W:0.425 / U:0.320 seconds]
©2003-2008 Jasper Spaans