lkml.org 
[lkml]   [2002]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Cyrix IRQ routing is wrong?
Hi, Alan!

On Fri, 5 Jul 2002, Alan Cox wrote:

> > So I have to switch that code around on most GX1 boards that I use or
> > I'll get a lot of messages about IRQ routing conflicts.
>
> I've tested multiple boards too - what BIOS are yours ?

I'm not Christer, but I'll reply :-)
These are some strings extracted from the BIOS for EM-350A:

Award Modular BIOS v4.51PG
EM-350A Ver.B 11-21-2000
11/21/2000-GXm-Cx5530-2A434L7JC-00

Attached is a tarball with /proc/interrupts, output of "lspci -vxxx" and
dump_irq, all taken on EM-350A.

The brigde is 5530. i.e. the one that is documented in
http://www.national.com/ds/CS/CS5530.pdf

I also checked http://www.national.com/ds/CS/CS5530A.pdf, and it also says
that INTA is controlled by the bits 0:3 of the register 0x5c.

--
Regards,
Pavel Roskin
[unhandled content-type:application/x-gzip]
\
 
 \ /
  Last update: 2005-03-22 13:27    [W:2.121 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site