lkml.org 
[lkml]   [2002]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectWrong CPU count
Date
After upgrading  from kernel 2.4.7-10smp to 2.4.9-34smp using the Red Hat
RPM downloaded from RH Network, the CPU count on the machine reported by
dmesg and listed in /proc/cpuinfo was 4 rather than the actual 2.

This has occured on all 4 Dell 2650's that I've installed this patch on. I
don't have any other mult-processor machines available to test this with.

Things seem to run OK, but this is a bit ominous. Has anyone seem this
problem with this or other PC Models?

Thanks,
Bob


DISCLAIMER: The information contained herein is confidential and is intended
solely for the addressee(s). It shall not be construed as a recommendation
to buy or sell any security. Any unauthorized access, use, reproduction,
disclosure or dissemination is prohibited. Neither ISLAND nor any of its
subsidiaries or affiliates shall assume any legal liability or
responsibility for any incorrect, misleading or altered information
contained herein. Thank you.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:27    [W:0.022 / U:2.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site