lkml.org 
[lkml]   [2002]   [Jun]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
Subjecteth problems
Two flaws and a problem:

Flaw 1:
The boot messages reveal what cards have been assigned what
ethN number for some, but not all cards. E.g.,

# dmesg | grep eth
eth0: 3c5x9 at 0x300, 10baseT port, address ..., IRQ 10.
eth2: RealTek RTL8139 Fast Ethernet at 0xd080d000, ..., IRQ 9
eth2: Identified 8139 chip type 'RTL-8139A'
eth3: i82596 ...
#

What is eth1? This information seems not easily available.

I once gave a patch - can dig it up again if there is any interest.
The kernel should report, preferably in a uniform way,
ethN: Vendor Model, MAC address, ...

Flaw 2:
Debugging output:

phy=0, phyx=24, mii_status=0xffff
phy=1, phyx=0, mii_status=0xffff
...
phy=24, phyx=23, mii_status=0xffff
phy=25, phyx=25, mii_status=0xffff
...
phy=31, phyx=31, mii_status=0xffff
***WARNING*** No MII transceivers found!


Problem:
[The above two flaws apply to many kernel versions.
However, today, upon booting 2.5.20 net connection failed.]

...
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0d.0: 3Com PCI 3c590 Vortex 10Mbps at 0xb400. Vers LK1.1.17
00:0d.0: Overriding PCI latency timer (CFLT) setting of 32, new value is 248.
...
NETDEV WATCHDOG: eth1: transmit timed out
eth1: transmit timed out, tx_status 00 status e000.
diagnostics: net 0cc0 media 88c0 dma 00000021 fifo 0000
Flags; bus-master 1, dirty 0(0) current 16(0)
...
eth1: Resetting the Tx ring pointer.
...

Andries
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:26    [W:0.043 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site