lkml.org 
[lkml]   [2002]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectBUG: cmd64x.c - CFR_INTR_CH0 - Kernel 2.4.x
Date
Andre,

It might just be me but I think there is an error within the defines
of the cmd64x.c driver file.

Looking through the specs for the cmd643 and cmd646 ( my laptop uses
both chips, primary channels only and doesn't play very well with kernel
2.4.x at the moment ) , they show that the configuration register (0x50) is
using bit 2 for channel 0 interrupt status (CFR_INTR_CH0).

The source specifies this as 0x02, should this not be 0x04 ?

Regards

Andy - Learning Linux 1 day at a time

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:26    [W:2.961 / U:2.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site