lkml.org 
[lkml]   [2002]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject2.4.19-pre9-ac3: Build problem
Date
Hi,

the following was observed first on 2.4.19-pre8-ac4, but could have been
in since earlier versions. After patching to -pre9-ac3 I copy a previous
working .config file and do:

make oldconfig
make dep
make bzImage
make modules

This works fine. Next I make a change to the configuration (any change)
and do

make dep clean
make bzimage

bzImage fails with:

gcc -D__KERNEL__ -I/lhome/martink/lx/linux-2.4.19-pre9-ac3-mkn/include
-Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing
-fno-common -pipe -mpreferred-stack-boundary=2 -march=i686 -nostdinc -I
/usr/lib/gcc-lib/i486-suse-linux/2.95.3/include -DKBUILD_BASENAME=compat
-c -o compat.o compat.c
make[3]: *** No rule to make target
`/lhome/martink/lx/linux-2.4.19-pre9-ac3-mkn/drivers/pci/devlist.h',
needed by `names.o'. Stop.
make[3]: Leaving directory
`/lhome/martink/lx/linux-2.4.19-pre9-ac3-mkn/drivers/pci'
make[2]: *** [first_rule] Error 2
make[2]: Leaving directory
`/lhome/martink/lx/linux-2.4.19-pre9-ac3-mkn/drivers/pci'
make[1]: *** [_subdir_pci] Error 2
make[1]: Leaving directory
`/lhome/martink/lx/linux-2.4.19-pre9-ac3-mkn/drivers'
make: *** [_dir_drivers] Error 2


Apparently "gen-devlist" is not [re-]build under these circumstances.

Martin
--
------------------------------------------------------------------
Martin Knoblauch | email: Martin.Knoblauch@TeraPort.de
TeraPort GmbH | Phone: +49-89-510857-309
C+ITS | Fax: +49-89-510857-111
http://www.teraport.de | Mobile: +49-170-4904759

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:26    [W:0.103 / U:0.552 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site