Messages in this thread | | | Date | Tue, 18 Jun 2002 08:31:08 +0200 | From | Martin Dalecki <> | Subject | Re: 2.5.22 ide disk hang on boot |
| |
Użytkownik Arnd Bergmann napisał: > Hi, > > In 2.5.22, I get during the partition detection (2.5.21 was ok): > > ... > /dev/ide/host0/bus0/target0/lun0: [PTBC] (6201/240/63) p1 p2 p3 <hda: status > error: status = 0x58 [drive ready seek complete data request] > hda: recalibrating > > After that, I have to reboot. The machine is an IBM thinkpad A30p, the > ide controller is an ICH3 ("Intel Corp. 82801CAM IDE U100 (rev 1)") and > the drive says it is "IC25T048ATDA05-0". > I tried reverting the last IDE patches but got too many rejects. > > After replacing the ata_error that came last with BUG(), I got the > backtrace below (assuming I copied every address correctly from the > screen). > > Arnd <>< > > Trace; c01f9242 <ata_status_poll+92/c8> > Trace; c01fb2d1 <start_request+c5/17c> > Trace; c01eb38a <__elv_next_request+a/10>
I assume that the system in question isn't:
1. Isn't setting up the drive in BIOS for DMA operation?
2. Isn't showring the hda: hda1.... partition layout?
As one can see from the above the problem is caused by PIO read getting worser. I know the problem and am working on it. As a band plase apply patch -p1 -R < ide-clean-92.diff. I hope I can provide the proper solution soon.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |