lkml.org 
[lkml]   [2002]   [Jun]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.5.20 hardlock w/ hdparm
Hi Lionel, Martin,
2.5.20, hdparm + IDE deadlocks on my testbox

kernel:Linux version 2.5.20+prempt (zwane@montezuma.mastecende.com) (gcc version
2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #24 SMP Wed Jun 5 21:48:07 SAST 2002

ata subsys:
ATA/ATAPI device driver v7.0.0
ATA: PCI bus speed 33.3MHz
ATA: Silicon Integrated Systems [SiS] 5513 [IDE], PCI slot 00:00.1
PCI: No IRQ known for interrupt pin A of device 00:00.1. Please try using pci=biosirq.
ATA: chipset rev.: 208
ATA: non-legacy mode: IRQ probe delayed
SiS620
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD75DA-00AWA1, DISK drive
hdb: WDC AC11200L, DISK drive
hdc: ST310212A, DISK drive
hdd: ATAPI CDROM, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 14666400 sectors w/2048KiB Cache, CHS=15520/15/63, UDMA(66)
hda: [PTBL] [912/255/63] hda1 hda2 hda3 hda4
hdb: 2503872 sectors w/256KiB Cache, CHS=2484/16/63, DMA
hdb: [PTBL] [621/64/63] hdb1
hdc: 20005650 sectors w/512KiB Cache, CHS=19846/16/63, UDMA(66)
hdc: [PTBL] [1245/255/63] hdc1 hdc2 hdc3
hdc2: <netbsd: hdc5 hdc6 >
hdd: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12

strace hdparm /dev/hda:
lseek(3, 0, SEEK_SET) = 0
lseek(3, 0, SEEK_SET) = 0
lseek(3, 0, SEEK_SET) = 0
lseek(3, 0, SEEK_SET) = 0
getitimer(ITIMER_REAL, {it_interval={1000, 0}, it_value={993, 770000}}) = 0
write(1, "128 MB in 4.35 seconds = 29.43 "..., 39128 MB in 4.35 seconds = 29.43 MB/sec) = 39
fsync(3) = 0
ioctl(3, BLKFLSBUF, 0) = 0
ioctl(3, 0x31f, 0) = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
nanosleep({1, 0}, {1, 0}) = 0
shmdt(0x4001f000) = 0
shmget(IPC_PRIVATE, 1048576, 0x180|0600) = 32768
shmctl(32768, 0x10b /* SHM_??? */, 0) = 0
shmat(32768, 0, 0) = 0x4001f000
shmctl(32768, 0x100 /* SHM_??? */, 0) = 0
sync() = 0
rt_sigprocmask(SIG_BLOCK, [CHLD], [], 8) = 0
rt_sigaction(SIGCHLD, NULL, {SIG_DFL}, 8) = 0
rt_sigprocmask(SIG_SETMASK, [], NULL, 8) = 0
nanosleep({3, 0}, {3, 0})
*** dead as a doorpost ***
write(1, " Timing buffered disk reads: ", 30 Timing buffered disk reads: ) = 30
setitimer(ITIMER_REAL, {it_interval={1000, 0}, it_value={1000, 0}}, NULL) = 0
getitimer(ITIMER_REAL, {it_interval={1000, 0}, it_value={1000, 0}}) = 0
read(3, "3\300\216\320\274\0|\373P\7P\37\374\276\33|\277\33\6PW"..., 1048576) = 1048576

I was going to test a disk w/o DMA (try to cover all the bases) but i got the
following repeatedly until it locks up again;
hdb: lost interrupt
hdb: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hdb: drive not ready for command

Now i'm not 100% sure wether this is even an ATA problem (although my SCSI
based testbox survived) and pretty certain its not an SiS controller
problem but i'll try and find the point where it deadlocks, pretty bad
bug report, please tell me which information you'd really want.

btw Martin you seem to like pain so get ready for when i whip out the old
Quantum mavericks, 486 (SiS) and Opti621 card ;)

Thanks,
Zwane Mwaikambo
--
http://function.linuxpower.ca



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:26    [W:3.752 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site