Messages in this thread | | | From | Marcin Bajko <> | Subject | Problem with framebuffer for ATI Rage Mobility P/M AGP (kernel 2.4.18) | Date | Mon, 10 Jun 2002 12:57:31 +0200 |
| |
Hello, I have trouble with ATI Rage Mobility P/M AGP graphic card in TravelMate 525TX laptop.
I want to use framebuffer driver for console but I see black screen only. I can change resolution by "fbset", all works fine but screen is still black.
Please help...
Marcin
dmesg: atyfb: using auxiliary register aperture atyfb: 3D RAGE Mobility (PCI) [0x4c4d rev 0x64] 8M SDRAM, 29.498928 MHz XTAL, 230 MHz PLL, 50 Mhz MCLK Console: switching to colour frame buffer device 80x25 fb0: ATY Mach64 frame buffer device on PCI
Kernel 2.4.18 compiled with options: CONFIG_FB=y CONFIG_DUMMY_CONSOLE=y CONFIG_VIDEO_SELECT=y CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y CONFIG_FBCON_CFB8=y CONFIG_FBCON_CFB16=y CONFIG_FBCON_CFB24=y CONFIG_FBCON_CFB32=y CONFIG_FBCON_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y
lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) (prog-if 00 [VGA]) Subsystem: Acer Incorporated [ALI]: Unknown device 1010 Flags: bus master, stepping, medium devsel, latency 32, IRQ 11 Memory at 81000000 (32-bit, non-prefetchable) [size=16M] I/O ports at 8000 [size=256] Memory at 80600000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at 80620000 [disabled] [size=128K] Capabilities: [50] AGP version 1.0 Capabilities: [5c] Power Management version 1 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |