Messages in this thread | | | Date | Thu, 2 May 2002 14:57:48 -0700 | From | Eugene Kuznetsov <> | Subject | Re[4]: Support of AMD 762? |
| |
Hello Alan,
Thursday, May 02, 2002, 2:27:11 PM, you wrote:
>> AC> When someone volunteers to test it >> I do!
AC> --- arch/i386/kernel/pci-irq.c~ Thu May 2 21:00:46 2002 AC> +++ arch/i386/kernel/pci-irq.c Thu May 2 21:00:46 2002 AC> @@ -489,6 +489,8 @@ AC> pirq_serverworks_get, pirq_serverworks_set }, AC> { "AMD756 VIPER", PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B, AC> pirq_amd756_get, pirq_amd756_set }, AC> + { "AMD768", PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7443, AC> + pirq_amd756_get, pirq_amd756_set }, AC> { "default", 0, 0, NULL, NULL } AC> };
Doesn't work :(
Linux version 2.4.18 (root@sparky) (gcc version 2.95.3 20010315 (release)) #8 SMP Thu May 2 14:46:52 PDT 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffec000 (usable) BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data) BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) found SMP MP-table at 000f4e70 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. On node 0 totalpages: 131052 zone(0): 4096 pages. zone(1): 126956 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 16 Processor #1 Pentium(tm) Pro APIC version 16 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 Kernel command line: BOOT_IMAGE=amd ro root=1602 video=radeon:1024x768-32@100 Initializing CPU#0 Detected 1344.331 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2680.42 BogoMIPS Memory: 513372k/524208k available (1182k kernel code, 10448k reserved, 369k data, 256k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU0: AMD Athlon(TM) XP 1500+ stepping 02 per-CPU timeslice cutoff: 731.14 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 2686.97 BogoMIPS CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU1: AMD Athlon(TM) XP 1500+ stepping 02 Total of 2 processors activated (5367.39 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-13, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC.......................
IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 1 1 0 1 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 1 1 0 1 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 1 1 0 1 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 1 1 0 1 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 000 00 1 0 0 0 0 0 0 00 0e 003 03 0 0 0 0 0 1 1 91 0f 003 03 0 0 0 0 0 1 1 99 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1344.3191 MHz. ..... host bus clock speed is 268.8636 MHz. cpu: 0, clocks: 2688636, slice: 896212 CPU0<T0:2688624,T1:1792400,D:12,S:896212,C:2688636> cpu: 1, clocks: 2688636, slice: 896212 CPU1<T0:2688624,T1:896192,D:8,S:896212,C:2688636> checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xf0df0, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router AMD768 [1022/7443] at 00:07.3 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd radeonfb: ref_clk=2700, ref_div=12, xclk=23000 from BIOS fb_find_mode(1024x768-32@100) Trying specified video mode Trying mode noname 1024x768-32@100 Console: switching to colour frame buffer device 128x48 radeonfb: ATI Radeon 8500 QL DDR SGRAM 64 MB radeonfb: DVI port no monitor connected radeonfb: CRT port CRT monitor connected pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device 39, VID=1022, DID=7441 PCI_IDE: chipset revision 4 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD800BB-00CAA0, ATA DISK drive hdc: WDC WD200BB-75AUA1, ATA DISK drive hdd: SAMSUNG CDRW/DVD SM-308B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(33) hdc: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63, UDMA(33) hdd: ATAPI 32X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hdc: [PTBL] [2434/255/63] hdc1 hdc2 hdc3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected AMD AMD 760MP chipset agpgart: AGP aperture is 128M @ 0xf0000000 SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. ds: no socket drivers loaded! VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 256k freed natsemi.c:v1.07 1/9/2001 Written by Donald Becker <becker@scyld.com> http://www.scyld.com/network/natsemi.html (unofficial 2.4.x kernel port, version 1.07+LK1.0.14, Nov 27, 2001 Jeff Garzik, Tjeerd Mulder) eth0: NatSemi DP8381[56] at 0xe4864000, 00:02:e3:17:ad:a2, IRQ 9. Creative EMU10K1 PCI Audio Driver, version 0.18, 09:18:48 Apr 16 2002 emu10k1_probe PCI: Enabling device 00:09.0 (0004 -> 0005) PCI: No IRQ known for interrupt pin A of device 00:09.0. Probably buggy MP table. emu10k1: IRQ in use usb.c: registered new driver hub mice: PS/2 mouse device common for all mice usb-uhci.c: $Revision: 1.275 $ time 09:07:58 Apr 17 2002 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hid hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers eth0: link up.
00:00.0 Host bridge: Advanced Micro Devices [AMD]: Unknown device 700c (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at ef800000 (32-bit, prefetchable) [size=4K] Region 2: I/O ports at e800 [disabled] [size=4] Capabilities: [a0] AGP version 2.0 Status: RQ=15 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Advanced Micro Devices [AMD]: Unknown device 700d (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: df000000-dfdfffff Prefetchable memory behind bridge: dff00000-ef7fffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD]: Unknown device 7440 (rev 04) Subsystem: Asustek Computer, Inc.: Unknown device 8044 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD]: Unknown device 7441 (rev 04) (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices [AMD]: Unknown device 7441 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at b800 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD]: Unknown device 7443 (rev 03) Subsystem: Asustek Computer, Inc.: Unknown device 8044 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 07) Subsystem: Creative Labs: Unknown device 8064 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 5000ns max) Interrupt: pin A routed to IRQ 0 Region 0: I/O ports at b400 [size=32] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 Input device controller: Creative Labs SB Live! (rev 07) Subsystem: Creative Labs Gameport Joystick Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 0: I/O ports at b000 [disabled] [size=8] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 PCI bridge: Advanced Micro Devices [AMD]: Unknown device 7448 (rev 04) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: dc800000-deffffff Prefetchable memory behind bridge: dfe00000-dfefffff BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
01:05.0 VGA compatible controller: ATI Technologies Inc: Unknown device 514c (prog-if 00 [VGA]) Subsystem: ATI Technologies Inc: Unknown device 013a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (2000ns min), cache line size 08 Interrupt: pin A routed to IRQ 3 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at d800 [size=256] Region 2: Memory at df000000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at dffe0000 [disabled] [size=128K] Capabilities: [58] AGP version 2.0 Status: RQ=47 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA+ AGP- 64bit- FW- Rate=<none> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 Ethernet controller: National Semiconductor Corporation: Unknown device 0020 Subsystem: Netgear: Unknown device f311 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2750ns min, 13000ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at a800 [size=256] Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=320mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME+
02:06.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI]) Subsystem: Unknown device 807d:0035 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (250ns min, 10500ns max), cache line size 08 Interrupt: pin A routed to IRQ 0 Region 0: Memory at dd800000 (32-bit, non-prefetchable) [disabled] [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:06.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI]) Subsystem: Unknown device 807d:0035 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (250ns min, 10500ns max), cache line size 08 Interrupt: pin B routed to IRQ 0 Region 0: Memory at dd000000 (32-bit, non-prefetchable) [disabled] [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:06.2 USB Controller: NEC Corporation: Unknown device 00e0 (rev 02) (prog-if 20) Subsystem: Unknown device 807d:1043 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 8500ns max), cache line size 08 Interrupt: pin C routed to IRQ 0 Region 0: Memory at dc800000 (32-bit, non-prefetchable) [disabled] [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-- Best regards, Eugene mailto:ekuznetsov@divxnetworks.com
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |