lkml.org 
[lkml]   [2002]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 160gb disk showing up as 137gb
> If you are using a 3Ware adapter, you will need to upgrade 
> the firmware to enable 48 bit lba. Ditto other RAID controllers.

It's not on a raid controller. The machine has a PIIX3 ide controller and a
AHA-2940UW scsi controller. Both exibit the same problem.

> > | Just bought a maxtor 160gb disk and it shows upt as a 137gb disk. I thought
> > | this might be the system board's ide chipset limitation so I put a scsi->ide
> > | adapter on the drive. Same situation occurs. I'm looking at what the kernel
> > | reports when it finds the drive. /proc/partitions shows this drive as:
> > | 8 0 134217727 sda
> > | /proc/scsi/scsi shows:
> > | Attached devices:
> > | Host: scsi0 Channel: 00 Id: 00 Lun: 00
> > | Vendor: Maxtor 4 Model: G160J8 Rev: GAK8
> > | Type: Direct-Access ANSI SCSI revision: 02
> > |
> > | I tried kernel 2.4.14 and 2.4.18. Any ideas?
> >
> > Hi,
> >
> > There was a thread on this 2-3 months back.
> > IDE in 2.4 doesn't have a 48-bit block address interface IIRC,
> > although Andre has some patches for this.
> > This is necessary to go above 137 GB.
> >
> > --
> > ~Randy
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
--
Lab tests show that use of micro$oft causes cancer in lab animals
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:25    [W:0.053 / U:0.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site